To add...
http://customersupport.tivo.com/tivo...ic/tv1035.htm?
How Do I Perform a Code Search if None of the Codes for My Manufacturer Work? 01-39-01 Search Reference Number
--------------------------------------------------------------------------------
The below information should only be used if you have already attempted to program your remote control using TiVo setup and were unable to find the correct IR code. For information on programming your remote, go to How Do I Program My Remote to Control My TV or Stereo?
To perform a code search, perform the following steps:
1. Cover the end of the TiVo remote control with your hand.
2. Perform one or more of the following:
- To search for a code to control TV Power and Volume: Hold down the TiVo and TV POWER buttons simultaneously until the red light on the remote control remains on.
- To search for a code to control the INPUT button on your TV: Hold down the TiVo and TV INPUT buttons simultaneously until the red light on the remote control remains on.
- To search for a code to control A/V Stereo Volume: Hold down the TiVo and MUTE buttons simultaneously until the red light on the remote control remains on.
The red light on the remote will illuminate until the code search is complete.
Edit: I would like to add that you have to press and hold the TiVo button and the TV Power button for at least 5 seconds before the lights stay on
3. Enter one or more of the following:
- To search TV Power and Volume codes: Enter code 0999.
- To search TV Input codes: Enter code 0999.
- To search A/V Stereo codes: Enter code 1999.
After you enter the code, the red light will flash three times and then remain on.
4. Press CHANNEL UP once every two seconds. This will test hundreds of codes, one by one.
5. Perform one or more of the following:
- TV Power and Volume: If you press CHANNEL UP and your TV turns off, press ENTER to select the code.
- TV Input: If you press CHANNEL UP and your TV switches inputs, press ENTER to select the code.
- A/V Stereo: If you press CHANNEL UP and the volume on your stereo is muted, press ENTER to select the code.
6.Perform one or more of the following:
- TV Power and Volume: Press the TV POWER button on the remote control to test the code.
- TV Input: Press the TV INPUT button on the remote control to test the code.
- A/V Stereo: Press the VOLUME UP and then the VOLUME DOWN buttons on the remote control to test the code.
7. If you cycle through all the codes, the red LED will go off, indicating that you have tried all the codes.
If you went through this process and you do not find your code the first time, you might want to try the process a couple of times to make sure you did not skip over your code by going too fast. If you cannot find a code that will work, your brand of TV or stereo may not currently be supported.
Ex Tivo Owner.
Philips Tivo
Version 1.3 Emulator Image from Minnie
200Gig Western Digital HDD
No Turbonet or Cachecard
Slices: Cable Digital FTA
Bookmarks