yep - i followed the instructions - but my time is out by 5 hours.Originally Posted by waynez
is there an easy way to fix the time?
ken
Thanks for that, have just tested it, and it all appears to be working again.
yep - i followed the instructions - but my time is out by 5 hours.Originally Posted by waynez
is there an easy way to fix the time?
ken
Yup.Originally Posted by badcat
http://forums.oztivo.net/showpost.php?p=223&postcount=2
All going again - cheers guys.
Although UKTV & 59 (Arts) isn't showing now - got the message and have updated twice but no change - any ideas?. (Don't really care though - don't watch much on them)
Last edited by Muzza; 20-08-2004 at 06:51 PM.
Yep, all good again, thanks.
Used the re-setup to swap everything in the rat's nest of cabling behind the rack over to S-Video. I had difficulty with my Sky Pace box originally to get S-Video out of the SCARTs (I needed to learn about Pace Advanced Setup). Now that's all sorted, the picture seems to be a tad clearer on S-Video versus composite.
I get the same problem as Muzza, UKTV shows AS National on mine, but then it tunes to UKTV as it's pointing to channel 4... of course. I did have UKTV fine before...not a hyuge problem tho...
You mean your guide data for UKTV shows on National, that is normal since the FSID of UKTV was what National is now.. that will disappear soon when the current guide data runs out and is replaced with National data. Probably take a week..Originally Posted by fixxer37
Hey Jaidev,
As channel 4 I have national, it has: to be announced instead of guide data and UKTV is missing all together. I ran throught your dbset commands for changing and existing channel's FSID, Name, Station etc and all worked APART from FSID (e.g I have UKTV showing as 4 again but still no guide data as it'll be seeing it as national still). But this may all go away once I re-image so not to worry too much.
Yes, another newbie... we all have to start somewhere...
I did a clear and delete last night and expected the Guided setup to run - and the first screen did (ths will take 23 minutes etc) and on hitting select I go straight to My Tivo page (ie the guided set doesn't run...).
I also can not get into the "Recorder and Phone Setup' menu - it makes the right sound, but just represents the same menu again. (nor does this work from the Tivoweb interface)
If I web in, I can tell it to make the daily call, but it usually just sits there saying : SettingUp
Does this seem related - or should I just rebuild....?
Oh, I note the log for tclient.conf shows:
Aug 23 09:27:44 (none) tcphonehome[114]: Setup not finished, skipping call
makes sense, but I can't seem to get it to run the guided setup.....
Last edited by MrGadget; 23-08-2004 at 07:57 AM.
You're in PAL mode... Got the Tivoweb PAL/NTSC module, change to PAL-Guided Setup, and reboot.
Bookmarks