?how to convert pronto neo IR codes

[NetMedic]

Hi T1voZA.

Just to thank you for all your help. I'm going to try your suggestions tomorrow.

Unfortunately, my tivo is not connected to a network. I can't get a cable to it where it is in the living room. I do have a turbonzet card but even if I fit it, I would have to move the tivo from the living room to my office where the network is, and there's no way of testing the IR blaster from there when the STB is in the living room. Hence I'm doing all my editing and uploading via the tivo's serial port and use zmodem which mostly works ok. This way I can keep the tivo close the the stb and test the ir blaster. I keep my notebook near the tivo and run backwards and forwards to it with the files on a thumb drive. I get my guide data via the modem dial up system as there is a phone line near the tivo in the living room. And my guide data arrives very nicely every day as it should.

However, you will deduce from all this that I can't elegantly call the tivo box via tivoweb and operate it remotely. I'm doing some real hacking!

Despite all this, I think I can suss out a way of getting the files you suggest, into the box. It'll take a bit of time and effort though!

I'll let you know how I get on.

Thanks for your help.

Chris.