Page 1 of 7 123 ... LastLast
Results 1 to 10 of 69

Thread: Daily call not working

  1. #1
    Join Date
    Feb 2007
    Location
    Melbourne. Vic
    Posts
    79

    Daily call not working

    Hi there,
    Help please! I have a new tivo and the daily call won't work. I got it from Darren King (thanks!) and it worked for him, but i haven't been able to get it to make any daily calls.

    I have followed the instructions on the Networking How To diagnostics and ifconfig, route, ping and dial prefix work, but wget fails - i get this:

    [TiVo [p1] ~]# wget http://131.244.9.101/index.html
    --20:22:54-- http://131.244.9.101/index.html
    => `index.html.4'
    Connecting to 131.244.9.101:80...

    The tclient log from my last attempt is attached.

    Any help would be most appreciated!

    Cheers,
    Melissa.
    Attached Files Attached Files

  2. #2
    Join Date
    Apr 2004
    Location
    Perth, Western Australia
    Posts
    3,032
    Your TiVo's IP is 192.168.0.10

    What is the internet address of your router

    Your TiVo is timing out both during the wget you tried and during the daily call

    Peter.

    PS minnie is appears to be down at the moment. so daily calls and wgets won't work.
    Please search this forum and our Website for your TiVo questions before starting a new thread. Thanks!

  3. #3
    Join Date
    Feb 2007
    Location
    Melbourne. Vic
    Posts
    79
    Hi Peter,
    The IP of the router is 192.168.0.1

    When i tried it all a week ago the wget was fine, but still no daily call.

    Melissa.

  4. #4
    Join Date
    Apr 2004
    Location
    Perth, Western Australia
    Posts
    3,032
    Ok, at least both the TiVo and router are on the same subnet.

    Does wget fail for you right now?

    could you post the results of your 'route' test and the contents of your /etc/oztivo.conf file.

    Peter.
    Please search this forum and our Website for your TiVo questions before starting a new thread. Thanks!

  5. #5
    Join Date
    Feb 2007
    Location
    Melbourne. Vic
    Posts
    79
    Wget is still timing out

    [TiVo [p1] ~]# route
    route_info, afname=inet, options=33
    Kernel IP routing table
    Destination Gateway Genmask Flags Metric Ref Use Iface
    192.168.0.0 * 255.255.255.0 U 32767 0 0 eth0
    default 192.168.0.1 0.0.0.0 UG 0 0 0 eth0

    # OzTiVo menu configuration settings file
    # Please do not edit this file
    # Run the nic_config_tivo tool to reconfigure
    nic=TurboNet
    ip=192.168.0.10
    mac=00:0B:AD:72:47:36
    timing=3
    hostname=oztivo
    emulator=minnie.tuhs.org
    emulatorport=80
    netmask=255.255.255.0
    gateway=192.168.0.1
    ssid=
    wep=
    wepkey=

    Cheers,
    Melissa.

  6. #6
    Quote Originally Posted by MelissaH View Post
    Wget is still timing out
    Could you try the following:

    wget http://210.48.107.133:8000

    then

    wget http://210.48.107.133:80

    If the 1st works but not the second, it's probably a proxy problem at your ISP.

    Also can you post the output of:

    traceroute -n 131.244.9.101

  7. #7
    Join Date
    May 2004
    Location
    Victoria
    Posts
    1,207
    It may be worth mentioning that you are trying to use a wireless adaptor on a Turbonet card too.
    Darren King
    OzTiVo Repairs and Modifications
    If your TiVo requires repairs or modifications
    then visit: http://kingey1971.wix.com/tivorepairs

  8. #8
    Join Date
    Apr 2004
    Location
    Perth, Western Australia
    Posts
    3,032
    Quote Originally Posted by Darren King View Post
    It may be worth mentioning that you are trying to use a wireless adaptor on a Turbonet card too.
    In that case it may be worth plugging your TiVo directly into the router to rule out the Wireless portion. You don't need to have any other connections in the TiVo, just power and network to test this.

    Peter.
    Please search this forum and our Website for your TiVo questions before starting a new thread. Thanks!

  9. #9
    Join Date
    Feb 2007
    Location
    Melbourne. Vic
    Posts
    79
    The Tivo is now plugged directly into the router and the results are:

    [TiVo [p1] ~]# wget http://210.48.107.133:8000
    --16:42:22-- http://210.48.107.133:8000/
    => `index.html.6'
    Connecting to 210.48.107.133:8000... connected.
    HTTP request sent, awaiting response... 200 OK
    Length: 1,858 [text/html]

    0% [ ] 1,858 0.00B/s ETA 00:00

    Last-modified header invalid -- time-stamp ignored.
    16:42:22 (0.00 GB/s) - `index.html.6' saved [1858/1858]


    [TiVo [p1] ~]# wget http://210.48.107.133:80
    --16:42:46-- http://210.48.107.133/
    => `index.html.7'
    Connecting to 210.48.107.133:80...

    [TiVo [p2] ~]# traceroute -n 131.244.9.101
    traceroute to 131.244.9.101 (131.244.9.101), 30 hops max, 40 byte packets
    1 192.168.0.1 1.929 ms 1.148 ms 0.990 ms
    2 203.17.101.67 17.147 ms 16.603 ms 15.794 ms
    3 203.10.110.195 16.234 ms 15.648 ms 16.053 ms
    4 * 203.166.93.197 15.461 ms 19.244 ms
    5 210.80.33.157 17.748 ms 16.003 ms 15.536 ms
    6 210.80.32.34 15.970 ms 15.573 ms 16.039 ms
    7 202.139.39.253 19.456 ms 15.114 ms 16.714 ms
    8 202.139.124.86 45.917 ms 48.597 ms 49.192 ms
    9 59.154.4.2 47.126 ms 45.791 ms 45.266 ms
    10 203.13.70.25 53.954 ms 56.301 ms 55.108 ms
    11 203.144.10.94 51.654 ms 175.484 ms 115.739 ms
    12 192.48.109.2 134.035 ms 188.031 ms 195.143 ms
    13 * * *
    14 * * *
    15 * * *
    16 * * *
    17 * * *
    18 * * *

    Thanks,
    Melissa.

  10. #10
    Ok, your networking setup is working fine and you get sucessfully to to port 8000 on a remote server.

    But you cannot get to port 80 on a remote server (which is what you need for the daily call).

    This is usually caused by your ISP's proxy (or possibly but unlikely by your router setup)
    I'm assuming you can get to http://minnie.tuhs.org/ from you computer.

    I believe the workaround is to use the emuproxy, but I would have thought you were already using it. (This is outside my knowledge area).
    Could you copy any lines from /etc/tclient.conf which doesn't start with a #
    Should be something like
    127::127.0.0.1:8000:::

    and any line in rc.sysinit.author which start with emuProxy

    Somebody who knows the Oztivo emulator setup should be able to help you.
    (I'm in NZ)

Similar Threads

  1. S1 now failing to connect for daily call or test call
    By peter in forum Question and Answer Forum
    Replies: 7
    Last Post: 11-11-2009, 06:15 PM
  2. Daily Call Required but not working
    By raffi in forum Question and Answer Forum
    Replies: 2
    Last Post: 16-06-2009, 12:37 AM
  3. Daily call not working
    By MelissaH in forum Question and Answer Forum
    Replies: 40
    Last Post: 13-02-2008, 04:44 PM
  4. Daily Call no longer working
    By tatch76 in forum New Zealand TV Guide Issues
    Replies: 9
    Last Post: 09-10-2007, 07:37 PM
  5. Daily call: "Failed. Call Interrupted"
    By leanne in forum TV Guide Issues
    Replies: 4
    Last Post: 18-07-2005, 06:07 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •