Change from modem to broadband

[meanderingmac]

I did the tclient change (though that would be the ozzie guide data?) and ran through the setup. Nope, no joy. It just wants a phone number. It seems to be ignoring the ,#401 and going for the modem.

Thanks anyway for your help Peter. Much appreciated. I'll think on it a while.

I'm surprised no one else is having a problem with the dial-up for guide data. If mine stopped getting through, others must have the same problem.
I changed the tclient back to dial up (and hashed out the ,#401 in the author file) and ran the guided setup. It dial out fine, and I can hear it trying to connect, comes up onscreen "connecting", then disconnects and displays the "failed, service not answering" message. Why did it work a week ago (for six months), and not now?

Maybe I'll buy a radio. Now thats just crazy talk!

[petestrash]

I did the tclient change (though that would be the ozzie guide data?)

Not quite, changing the address in tcilent, made your TiVo use emuproxy2 as you have already setup in rc.sysinit.author. The NZ server is also setup in that file.

I'm surprised no one else is having a problem with the dial-up for guide data. If mine stopped getting through, others must have the same problem.
I changed the tclient back to dial up (and hashed out the ,#401 in the author file) and ran the guided setup. It dial out fine, and I can hear it trying to connect, comes up onscreen "connecting", then disconnects and displays the "failed, service not answering" message. Why did it work a week ago (for six months), and not now?

If you don't have any recordings you need to keep, why not just start with a clean install of the latest OzTiVo image which supports NZ.

It would make it easier for us to support as a lot of mechanisms have changed and I can't remember all the old methods.

Peter.

[meanderingmac]

Yes, I think you might be right. Starting clean with the latest image may be the go.

Thanks again for your efforts Peter. I'll let you know how it goes.

Paul