Image suitable for UK TiVo

[finethen]

If you have any trouble getting the tuner in the UK hardware to tune into these channels then you might like to try using the attached ukchan module as it will setup the frequency table correctly and configure NICAM support. The guide data and headend information would have to be configured from the emulator as that is what would be populating the data.

Thanks Thomson, am I correct in thinking the frequency table should have been correctly set during reimaging by selecting NZ frequency and possibly Nicam as well when I selected dual audio?

Just have checked the channels by using the numbers on the remote and 1 is missing and the other channels are out by two or three depending on how high up they are e.g. Alt Tv is on channel 67 (should be 62) Maori is poorly tuned on 45 (should be 43) TV3 is on 9 (should be 7) so the frequency is not set correctly although Nicam is. I will try and reset with a new image first as I want to get the guided setup running smoothly and then maybe do a Thomsom setup howto for the NZTiVo site using guided setup noting the traps and tricks.