Ignore the above!!!!! Did as I was told, ie left it alone, and it's sorted itself out! Including rebooting back to normal PAL mode! This box keeps surprising me!
We've had occasional problems with our Tivo/Pace box not quite changing channels correctly, so this morning I used TivoWeb to go into PALGS mode, to change the remote speed, hoping that one setting slower would improve reliability. All was going well, I was in the middle of testing new settings when the Tivo suddenly rebooted itself! It then came up with a green screen saying 'a serious problem has occurred, leave alone for 3 hours, connected to the phone line, while it attempts to repair itself'
Arrggghh! Obviously it's still set to reboot in PALGS mode, it can't get a phone line connection, I can't get a network connection via Tivoweb or Putty, does this mean a complete reimage? I sincerely hope not, beyond my capabilities!
Ignore the above!!!!! Did as I was told, ie left it alone, and it's sorted itself out! Including rebooting back to normal PAL mode! This box keeps surprising me!
Glad to hear it righted itself.
A reimage is about the simplest thing with owning a TiVo! It is a bootable CD installer and you just follow the menu prompts.Originally Posted by tonys
Darren King
OzTiVo Repairs and Modifications
If your TiVo requires repairs or modifications
then visit: http://kingey1971.wix.com/tivorepairs
NOW ALSO REPAIRING FETCH TOO!
After the problems mentioned above, I checked the TVlog file and noticed the 'normal' clock warped messages, so did a touch timestamp and forced a reindex. All is fine, season passes recording OK etc, but seem to have lost endpadding. Checked the endpaad log file and it ends on Saturday with the message 'too many errors, stopping' Can I do anything to reactivate endpad?
On the command line, run something like
endpadplus.tcl 1 10 -auto &
and it should start up again. (That's to start recording one minute before time, and finish ten minutes after.) If that doesn't work, a reboot should start endpadplus again.
Cheers
Matt
Thanks Matt, did a reboot and it's started up just fine!
If I want to run the endpad.tcl to alter the amount of pad time, do I need to change the file system to read/write first?
But the best place to do that anyway is in the startup scripts, specifically in /etc/rc.d/rc.sysinit.author , and you would need to be in RW mode to edit that file.
btw, does endpad work with negative numbers? In my experience, most, if not all programmes start and end late, it would be handy to get Tivo to start recording say 2 minutes late, which would then allow an extra 2 minutes on the previous programme. It's not a problem if the two programmes are on the same channel, but frustrating if not!
That's when you need to buy a second tivo, to record the other channel
You want the latest version of endpad (not endpadplus). This is what Kevin Lentin had to say about it: "Negative padding does EXACTLY what you want it to do. I have 5 minute pre-padding, 10 minute post-padding and 2 minute negative-padding and if a show is on its own with nothing around it, it will record from -5 to +10 and get 15 minutes extra. ie the pre-padding happens. If two shows are back-to-back, normally the post-padding of the first and the pre-padding of the second get dropped. With negative padding, that 5 minutes gets dropped but instead the second show starts 2 minutes late to let the first run over a bit."Originally Posted by tonys
The current version is here
Or more directly here (endpad-1.5.0.zip)
As well as negative padding, you can configure it to pad differently depending on the time, the channel or the program (or a combination of all 3).
Bookmarks