As Darren has said it does sound like a drive/image issue.

When you imaged the drive, did you still have a windows drive attached ?

If you boot into windows by mistake with a TiVo drive attached it will kill the TiVo image and won't boot.

Quote Originally Posted by RenJar
The hard drive is set to master and the computer I am using is the same one I built the unit with the first time (and second time). I have unplugged all the power connectors and plugged them back in again (good idea!). I have even attempting booting it with out the NIC.
Also make sure the IDE cable is still firmly seated onto the mainboard.

Peter