Originally Posted by
cshumphries
I'm a bit of a novice on the TIVO side of things - but thanks for all the info.
Have changed the ip addresses in the files mentioned to the orac but it still get failed - service unavailable.
Do I need to do anything else??
It was mentioned that all prgramming data needed to be cleared - how do I do this??
Sorry if i'm asking stupid questions!!
What oztivo image are you running?
So have edited your "/etc/tclient.conf" config file ?
and the following line should read...
# This is for the server emulator on minnie.
127::210.48.107.133:80:::
or
127::210.48.107.133:8000::: (if you want station logos)
If your 127:: line reads 127::127.0.0.1:8000::: then you are running emuproxy...
If you are running the latest oztivo image, you need to change the
emuProxy address in "/etc/rc.d/rc.sysinit.author"
to read..
/hack/bin/emuProxy2 -s 210.48.107.133 -p 8000 &
Last edited by jaidev; 30-09-2005 at 07:30 AM.
TiVo Series 1 Thompson PVR10UK Unit, Dual 250Gb, 512Mb Cachecard, NZ Emulator Port 8000
TiVo Series 1 Sony SVR2000 unit, Dual 300Gb, 512Mb Cachecard, Philips FTA Tuner, NZ Emulator Port 80
TiVo Series 1 Philips unit, Dual 160Gb, Turbonet, FTA Tuner, Private Emulator
TiVo Series 1 Philips unit, 120Gb, Turbonet, Dev Emulator, Development Unit...
DTiVo Series 1 Philips DSR6000 unit, 120Gb, Turbonet, Work in progress...
Reply With Quote
Bookmarks