Error in install instructions

[petestrash]

# Dennis' Emulator
126::66.23.218.193:80:::
# This is for the server emulator on minnie. Trouble if your ISP blocks HTTP .9
#127::131.244.9.101:80:::

# This uses emuProxy2 to avoid problems with transparent proxy. Thanks Tim!
127::127.0.0.1:8000:::

You can use any number of three digit codes pointing to different emulators (as long as they are not duplicated).

PS: I was interested to see that the Aussies leave two emulators active in the file... does this imply that one could put BOTH the NZ addresses in, and create some redundancy in case of server problems?

Sure can , and you can change between them from either the UI or a telnet session.

From the UI go to the system information screen and scoll down till you see 'Dial-in Configuration Code'. then press clear-clear-enter-enter-0.

It should now be asking you to enter a new code just type in the three digit code for the emulator you want to use and press enter.

In telnet you just need to find your 'PhoneConfig' numbers and change 'DialConfig' to the correct emulator.

PhoneConfig 2276/10 {
Version = 1800
CallWaitingPrefix = {}
LocalAreaCode = 008
TollFreeNum = 0
DialInAreaCode = {}
DialInPrefix = {}
DialInNum = 1272240
CallStatusInfo = 6
DialConfig = 127
DialPrefix = ,#401
LastCallAttemptSecInDay = 1125072014
LastDialInUpdateDate = 13021
InventoryFile = {}
LastSuccessCallSecInDay = 1125072014
LastCallStatus = Succeeded
LastSuccessPgdCallSecInDay = 1125072014
NextCallAttemptSecInDay = 1125167031
IndexPath = /State/PhoneConfig

Peter.