 OzTiVo Member
					
					
						Forum Newbie
					
					
						OzTiVo Member
					
					
						Forum Newbie
					
                                        
					
						
							
								 
							
						
					
					
						I just modded a friends TiVo that was originally purchased from HVN.
I was surprised to see it had a 1TB drive in it. They also had a 1TB expander drive. So two questions:
Were they sold with 1TB drives and does the expander actually work to give them 2TB in total?
Unfortunately the HDMI port didn't work, so I was unable to check it on my tv.
 OzTiVo Member
					
					
						Forum Newbie
					
					
						OzTiVo Member
					
					
						Forum Newbie
					
                                        
					
						
							
								 
							
						
					
					
						 Soldering Legend
					
					
						OzTiVo - Too good for a rank
					
					
						Soldering Legend
					
					
						OzTiVo - Too good for a rank
					
                                        
					
						
							
								 
							
								 
							
						
					
					
						Yes they were known as the TiVo XL
The model numbers were as follows:
663160 = 160GB
663320 = 320GB
663000 = 1TB
But all motherboards are identical which is why you can put up to a 2TB into any TiVo.
And yes a 1TB internal and 1TB external = 2TB .... although I don't suggest anyone go the route of adding an external anymore as they are known to be quite problematic.
HDMI is also repairable but takes a fair amount of soldering skill.
Darren King
OzTiVo Repairs and Modifications
If your TiVo requires repairs or modifications
then visit: http://kingey1971.wix.com/tivorepairs
NOW ALSO REPAIRING FETCH TOO!
 OzTiVo Member
					
					
						Forum Newbie
					
					
						OzTiVo Member
					
					
						Forum Newbie
					
                                        
					
						
							
								 
							
						
					
					
						Thanks for the replies.
Darren, can you elaborate on what needs to be changed for the HDMI fix?
 Soldering Legend
					
					
						OzTiVo - Too good for a rank
					
					
						Soldering Legend
					
					
						OzTiVo - Too good for a rank
					
                                        
					
						
							
								 
							
								 
							
						
					
					
						Usually the socket wasn't mounted correctly so a small gap exists between the board and the socket pins. Added to that the boards were done with lead free solder therefore over time the solder fractures.
If you are brave enough give the socket a resolder and you will be good to go.
Darren King
OzTiVo Repairs and Modifications
If your TiVo requires repairs or modifications
then visit: http://kingey1971.wix.com/tivorepairs
NOW ALSO REPAIRING FETCH TOO!
 OzTiVo Member
					
					
						Forum Newbie
					
					
						OzTiVo Member
					
					
						Forum Newbie
					
                                        
					
						
							
								 
							
						
					
					
						Spot on Darren, just soldered my socket now all good.
Regards
Mike
Bookmarks