I have the same problem as well. Looks like the TVNZ transmitted channels only 1 +2 + U + 7
Let me guess ... you are in Dunedin?
 Newbie
					
					
						Forum Newbie
					
					
						Newbie
					
					
						Forum Newbie
					
                                        
					
						
							
								 
							
						
					
					
						Every morning when I turn on TIVO, channels 1 and 2 have disappeared, I rescan the channels and they come back, but the next morning there is a message saying my antenna has changed and 1 and 2 are gone. This has only started happening in the last couple of weeks, basically since PRIME and Maori TV have been added to the EPG. Any suggestions?
 OzTiVo Senior Member
					
					
						OzTivo Super Poster
					
					
						OzTiVo Senior Member
					
					
						OzTivo Super Poster
					
                                        
					
						
							
								 
							
						
					
					
						I have the same problem as well. Looks like the TVNZ transmitted channels only 1 +2 + U + 7
Let me guess ... you are in Dunedin?
1 x Philips TiVo Series 1, Cachecard, 1 x 1TB SATA (with recent TradeMe sourced adaptor), Mk II Pal Tuner Mod, NZ Emulator, Previously Dual A/V Source, Now Pay Satellite
2 x TiVo HD, Freeview, HNP, 2TB (WD-AV) jmfs upgraded
1 x Thomson UK TiVo, Cachecard, 200GB, Testing Work
 Newbie
					
					
						Forum Newbie
					
					
						Newbie
					
					
						Forum Newbie
					
                                        
					
						
							
								 
							
						
					
					
						YES I am in Dunedin, how did you know? Anyone got any solutions?
 OzTiVo Senior Member
					
					
						OzTivo Super Poster
					
					
						OzTiVo Senior Member
					
					
						OzTivo Super Poster
					
                                        
					
						
							
								 
							
						
					
					
						Because I have the same problem ... and I think it only occurred after the frequency reshuffle in Dunedin on the 24th Jan
As yet no answer, although I've been testing a bunch of things
Have you changed your TiVo's Hard disk or is it the original?
1 x Philips TiVo Series 1, Cachecard, 1 x 1TB SATA (with recent TradeMe sourced adaptor), Mk II Pal Tuner Mod, NZ Emulator, Previously Dual A/V Source, Now Pay Satellite
2 x TiVo HD, Freeview, HNP, 2TB (WD-AV) jmfs upgraded
1 x Thomson UK TiVo, Cachecard, 200GB, Testing Work
 Newbie
					
					
						Forum Newbie
					
					
						Newbie
					
					
						Forum Newbie
					
                                        
					
						
							
								 
							
						
					
					
						Its the original, I have had it about 18months or so.
 OzTiVo Senior Member
					
					
						OzTivo Super Poster
					
					
						OzTiVo Senior Member
					
					
						OzTivo Super Poster
					
                                        
					
						
							
								 
							
						
					
					
						OK, so that eliminates that ... I've thrown a 2TB in mine, so thought that might be the issue.
I have a few splitters etc running signals around the house ... my last resort is that the signal is too low on the frequency that the TVNZ transmitter is on (there are three transmitters, the other two are ok mediaworks/kordia), However looking at the signal strength meters etc it looks ok/the same and a TV plugged into same place has no issue... work in progress
1 x Philips TiVo Series 1, Cachecard, 1 x 1TB SATA (with recent TradeMe sourced adaptor), Mk II Pal Tuner Mod, NZ Emulator, Previously Dual A/V Source, Now Pay Satellite
2 x TiVo HD, Freeview, HNP, 2TB (WD-AV) jmfs upgraded
1 x Thomson UK TiVo, Cachecard, 200GB, Testing Work
 Newbie
					
					
						Forum Newbie
					
					
						Newbie
					
					
						Forum Newbie
					
                                        
					
						
							
								 
							
						
					
					
						I dont think it is our setups, I think its something to do with the changeover on 24th of Jan, as thats when my problems started.
 OzTiVo Senior Member
					
					
						OzTivo Super Poster
					
					
						OzTiVo Senior Member
					
					
						OzTivo Super Poster
					
                                        
					
						
							
								 
							
						
					
					
						Service Issues
Some customers may be experiencing repeated channel scans, this was caused by the launch of some new digital broadcasters across New Zealand. From Wednesday 22nd February 2012 our Operations Team will be rolling out a software update, which resolves this issue. We expect all New Zealand TiVos to have automatically downloaded and installed this update within the next 10 days.
Thank you for your patience with this issue, if you are continuing to experience this problem please contact the Telecom My TiVo Support line.
1 x Philips TiVo Series 1, Cachecard, 1 x 1TB SATA (with recent TradeMe sourced adaptor), Mk II Pal Tuner Mod, NZ Emulator, Previously Dual A/V Source, Now Pay Satellite
2 x TiVo HD, Freeview, HNP, 2TB (WD-AV) jmfs upgraded
1 x Thomson UK TiVo, Cachecard, 200GB, Testing Work
 Newbie
					
					
						Forum Newbie
					
					
						Newbie
					
					
						Forum Newbie
					
                                        
					
						
							
								 
							
						
					
					
						YAY!!!!! Thats great I can't wait.
 OzTiVo Senior Member
					
					
						OzTivo Super Poster
					
					
						OzTiVo Senior Member
					
					
						OzTivo Super Poster
					
                                        
					
						
							
								 
							
						
					
					
						I see a 11.3b5 image on one of my tivos, the one with the problem is a b4 ... some something must be happening
Bit of a shocker that it too over a month to sort it out!
1 x Philips TiVo Series 1, Cachecard, 1 x 1TB SATA (with recent TradeMe sourced adaptor), Mk II Pal Tuner Mod, NZ Emulator, Previously Dual A/V Source, Now Pay Satellite
2 x TiVo HD, Freeview, HNP, 2TB (WD-AV) jmfs upgraded
1 x Thomson UK TiVo, Cachecard, 200GB, Testing Work
Bookmarks