Darren King
OzTiVo Repairs and Modifications
If your TiVo requires repairs or modifications
then visit: http://kingey1971.wix.com/tivorepairs
NOW ALSO REPAIRING FETCH TOO!
Yes that is the procedure.
Darren King
OzTiVo Repairs and Modifications
If your TiVo requires repairs or modifications
then visit: http://kingey1971.wix.com/tivorepairs
NOW ALSO REPAIRING FETCH TOO!
Thanks Darren.
Darren,
I fixed the tuner, but I have a problem with the IR codes, I'm currently on Foxtel satellite, I'm not sure of the box model (I looked all around but there was no info in the box) it displays the numbers on the front, any ideas?
I tried all the foxtel codes and the pace codes to no avail.
Also foxtel has triple digits for channels, the tivo displays only 2.
I don't have much experience with IR control. Pity you did not ask before reimaging as there would have been a way to note down the exact code. Too late now
You'll most likely find a model number on the rear or underneath the box. Just note down anything you find and post it here. Someone will know.
Darren King
OzTiVo Repairs and Modifications
If your TiVo requires repairs or modifications
then visit: http://kingey1971.wix.com/tivorepairs
NOW ALSO REPAIRING FETCH TOO!
I seemed to be locked out of the "phone & recorder settings" menu, everytime i select it, it takes me back to the same menu?
Some menus are like that as we are not running "proper" software but a hack of the USA software.
For example you cannot redo guided setup via this way. The correct procedure is outlined here: http://www.oztivo.net/twiki/bin/view...edoGuidedSetup
Darren King
OzTiVo Repairs and Modifications
If your TiVo requires repairs or modifications
then visit: http://kingey1971.wix.com/tivorepairs
NOW ALSO REPAIRING FETCH TOO!
Just to bring some finality to the thread, thanks to Peter and Darren I was able to successfully re-image from 1.3 to 1.6, we sorted out the network connection problem (I believe it was at my end with my connecting hardware-just had to tighten up the connections). I managed to reconfigure my pal tuner (I used the wrong selection in the set up stage- I used the phillips instead of the samsung), and finally Darrent helped me with the IR codes (problem was incorrect selection of foxtel services - I should have used foxtel digital satellite).
Peter and Darren you guys are a real credit to this forum and the ozTiVo community, keep up the fantastic work!
Bookmarks