Hi Wt,
Welcome to the Group.
I have moved your post to a more appropriate location, as your issue doesn't really apply to installing the image and also not NZ specific, this is a better location to recieve replies from a wider community.
Peter.
hi, tivo newbie here...bought the tivo of a friend, everything works great, i thought 120gb was enough for my tivo, but already run out of space, tried to copy recorded programmes to pc, but without any luck...all I get is a partial download(file size ranges from 5kb - 5mb) of any programme I try to download.
Using tyshow...i can refresh & get the now showing list, but when i select a prog. to upload to pc, it just downloads the first few seconds and thats it.
Can someone please help me with this?
Thanks
-wt
Hi Wt,
Welcome to the Group.
I have moved your post to a more appropriate location, as your issue doesn't really apply to installing the image and also not NZ specific, this is a better location to recieve replies from a wider community.
Peter.
Now as far as your question goes, what method are you using to transfer the shows?
For example do you have a network card in your TiVo and if so do you know what type (Airnet,Turbonet(or compatibles),Cachecard) or do you use a serial cable.
Peter.
thanks for the welcome pete.. Im using a network card, that is connected to my router via a switch. Don't know what network card I have, it was already installed.
The process I used to try & extract is from this guide: http://www.tuhs.org/twiki/bin/view/V...deoUsingTytool
There is something we can do if your TiVo is using a turbonet style card, but won't work with a cachecard
To see which you have try this in Telnet.
Post the results here.[TiVo [p0] ~]# lsmod
Peter.
thanks for the reply...heres the output i get:
Code:turbonet 6976 0 (unused) mixaud 5872 1 palmod 9840 0 (unused) pxmpegdecode 65484 0 (unused) therm 1228 0 (unused) fan 1312 0 fpga7114 146620 5 [palmod] i2c 10368 0 [palmod pxmpegdecode therm fpga7114]
[TiVo [p1] ~]# cat /etc/oztivo.conf
Output:
Code:# OzTiVo menu configuration settings file # Please do not edit this file # Put the TiVo disk back in your PC to reconfigure nic=TurboNet ip=DHCP mac=00:0B:AD:10:10:10 hostname=oztivo modem=0 pppondss=0 netmask= gateway= ssid= wep= wepkey=
Ok, now try:
Give the TiVo a little while to setlle after the reboot, then try the transfers again.[TiVo [p0] ~]# rw
[TiVo [p0] ~]# echo "timing=16" >> /etc/oztivo.conf
[TiVo [p0] ~]# ro
[TiVo [p0] ~]# reboot
Peter
Bookmarks