Results 1 to 10 of 30

Thread: NICAM sound

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #18
    Join Date
    May 2004
    Location
    Wellington, NZ
    Posts
    477
    Quote Originally Posted by catdog View Post
    You will need to modify and recompile Palmod to force it to use the Scart input instead.
    The attached palmod and palmod config can be used to configure this. A new option (s_audio) has been added. If this is set to 1 then SCART1 audio input is forced even if running with a MSP3410D.

    It should be noted that this is not the official palmod and is a little different to that which is distributed with the OzTivo image. It should however be pretty compatible with all previous config files.

    Updating palmod can stick your machine into a reboot loop if something goes wrong, so I would suggest you do something like that which is outlined here.

    The "bin" file just contains the binaries (palmod and palmod_config) whereas the "src" file contains both the binaries and the source code. After making the setting by either using the Audio options menu under palmod_config, or by adding a s_audio=1 to your /etc/palmod.conf file you will need to reload palmod (or reboot).
    Attached Files Attached Files

Similar Threads

  1. No sound
    By belair_boy in forum Australian TiVoHD
    Replies: 2
    Last Post: 14-05-2010, 05:36 PM
  2. Sound Out of Sync
    By RalphMesiti in forum Question and Answer Forum
    Replies: 5
    Last Post: 10-07-2008, 07:12 AM
  3. Any updates on the NICAM issue?
    By Professor Yaffle in forum New Zealand General Forum
    Replies: 2
    Last Post: 12-06-2007, 09:11 PM
  4. Ready made NICAM stereo decoder
    By Tomek Swiecicki in forum New Zealand General Forum
    Replies: 4
    Last Post: 02-04-2006, 09:14 PM
  5. Help...no sound
    By splitpin in forum Question and Answer Forum
    Replies: 9
    Last Post: 01-05-2004, 10:55 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •