Help with Installing new image. WAS:Help with telnet

[jaidev]

As Pete says those instructions are a little outdated and do not apply to the new NZ images. The new images are fully setup to control current NZ Sky STB's. You shouldn't need any extra setup as long as you have downloaded the supported NZ images as per below.
I presume you downloaded the nzTiVo-Philips-Installer-Aug06TWP.iso from the NZ FTP site? ftp.orac.caffeine.co.nz/images/nzTiVo-Philips-Installer-Aug06TWP.iso

If so, when you are imaging your Tivo with the install cdrom, you should be in the menu which will allow you to setup the Turbonet card.

Once you have imaged the Tivo, follow these instructions.. http://forums.oztivo.net/showthread.php?t=959

You are probably getting confused with these Guided Setup steps below.. It may seem like a modem call, but infact it is not, it is done over the turbonet, as long as you have one installed and have set it up during the imaging process via the install menu.

# "Phone Dialing Options" select 'no : continue' and press 'select' on 3.0 images. Note for the UK 2.5.5 software you'll need to enter the broadband dialing code ",#401"
# "Setup Call" Press select to go past this screen
# It will take a while to connect and do it's thing. The tivo will connect and download the headend, logo slices, IR slice and any messages.

Sorry about the confusion. I would love to update the nztivo wiki site but have no time with keeping other nztivo things running, we have requested other users to help in keeping the wiki site upto date, obviously this hasn't happened.