Try this command and post your results:
wget http://65.49.60.197:9090/index.html
Peter
Hi there,
I have not been able to make a daily call for a few days as i get 'Failed. Service unavailable' as a result.
I have attached the tclient log and also ran through the networking tests which were fine until i tried wget http://65.49.60.197/index.html
wget http://65.49.60.197/index.html
--17:11:59-- http://65.49.60.197/index.html
=> `index.html.14'
Connecting to 65.49.60.197:80... failed: Connection timed out.
Retrying.
I have previously had proxy issues, so i'm not sure what is going on!
Any help would be appreciated..
Thanks,
Melissa.
Try this command and post your results:
wget http://65.49.60.197:9090/index.html
Peter
[TiVo [p0] ~]# wget http://65.49.60.197:9090/index.html
--22:57:30-- http://65.49.60.197:9090/index.html
=> `index.html.14'
Connecting to 65.49.60.197:9090... connected.
HTTP request sent, awaiting response... 301 Moved Permanently
Location: http://www.oztivo.net/twiki/bin/view [following]
--22:57:31-- http://www.oztivo.net/twiki/bin/view
=> `view'
Resolving www.oztivo.net... failed: Host not found.
Thanks Peter
It looks like your ISP is blocking you differently.
Please edit the /etc/oztivo.conf file.
You will need to telnet into your TiVo and do the following:If this works, it should stop the issue re-occurring in the future.
- run the command "rw" to make the disk writable;
- use an editor (e.g the joe editor) and edit /etc/oztivo.conf
- Change emulatorport=80 to emulatorport=9090
- run the command "ro" to make the disk read-only;
- reboot the box. and try a daily call.
Peter.
I made the changes, but now i can't connect to the tivo via telnet or anything. I use wireless to connect to the tivo.
There is nothing in the above changes that would stop telnet access, all you have changed is what port is used to contact the emulator.
I assume you have rebooted?
Did you edit the file using the TiVo as suggested, and which program did you use?
Peter.
I admit i was in a hurry and edited it using Word....
I will give it a go tonight..... thanks Peter
I really shouldn't do these things on no sleep and no coffee
Hi Peter,
I was able to connect via serial cable and get a bash prompt in hyperterm but i have zero idea on what to do from there - sorry for the bother but I would greatly appreciate some detailed instructions..
Many thanks,
Melissa.
Bookmarks