Trouble with access to program information

[Darren King]

Hi Larry, and welcome.

This is for one of two reasons:

1. Have you tried rebooting the unit a few times, and when you reboot do you still get the OzTiVo "Starting Up...." screen or the OzTiVo "Maintenance Mode" screen. This is the SECOND screen you will see, not the one you immediately see after applying power.

2. If you have already done step 1 and this does not help then do a search on the oztivo website at www.oztivo.com for "warped clock" and follow the directions therein to verify you do not have a warped clock condition.

Here, I'll make it easy for you as here is a direct link to a search result with the keywords "warped;clock": http://131.244.9.101/twiki/bin/searc...eb=on&regex=on

[LSpitz]

Well, I followed the instructions in http://131.244.9.101/twiki/bin/view/...aveNoGuideData

I did have the warped clock problem and I followed the instructions and still see the same behaviour. So I need other hints on what to do.

(I should have said in my original posting that all of the functions used to work, I think that this failure was perhaps coincident with finally getting the IR codes correct from my Motorola STB, though I could be wrong about that and I have a hard time imagining how the two functions would interact.)

Larry

[LSpitz]

I guess what I lacked was patience. An hour after applying th fix for the warped clock syndrome, I still had the problem. 24 hours later I still had it. Magically maybe 48 hours later all or those problems went away.

Many thanks.

Bonus (for me) question: What the heck is a slice?

Larry

[zollymonsta]

a slice is a file which contains lots of info..

There can be a guide slice, which has all the tv listings in it.. and an ir slice, which has all the ir codes in it for every stb supported.

imagine many files just crammed into one file. The tivo downloads the slice, rather than many different files.