Results 1 to 2 of 2

Thread: Log file for S03 error

  1. #1

    Log file for S03 error during Guided Setup

    Hello

    I am getting the S03 error during guided setup when using postcode 5000. Below is the relevant snippet of my log file during the error from var/log/tclient.

    You can see that it gets up to 73% loading data (pct=73) at which point it fails. I was hoping an oztivo engineer might read this and advise on how I may be able to fix it, perhaps with a command through telnet or some other method.

    Code:
    Dec 10 12:36:10 (none) AvalPercentReporter[620]: pct=10 nSec=5 nSecLeft=48
    Dec 10 12:36:14 (none) WatchdogChore[572]: SameCallActive, compare last UNKNOWN to now 1512909313
    Dec 10 12:36:16 (none) AvalPercentReporter[620]: pct=20 nSec=11 nSecLeft=46
    Dec 10 12:36:18 (none) AvalPercentReporter[620]: pct=30 nSec=13 nSecLeft=31
    Dec 10 12:36:19 (none) AvalPercentReporter[620]: pct=40 nSec=14 nSecLeft=22
    Dec 10 12:36:22 (none) AvalPercentReporter[620]: pct=50 nSec=17 nSecLeft=18
    Dec 10 12:36:24 (none) AvalPercentReporter[620]: pct=60 nSec=19 nSecLeft=13
    Dec 10 12:36:24 (none) AvalPercentReporter[620]: pct=73 nSec=19 nSecLeft=8
    Dec 10 12:36:24 (none) db[620]: DbLoadGeneric TvStatus=0x30012 near GenBatch: Size=1 failed while nproc=790 item#=788 id=112699950 ty=50 nBadErr=1 lastBadErr=TvStatus=0x30012
    Dec 10 12:36:24 (none) db[620]: DbLoadGeneric TvStatus=0x30012 near GenBatch: min=4 max=5 failed while nproc=790 item#=788 id=112699950 ty=50 nBadErr=2 lastBadErr=TvStatus=0x30012
    Dec 10 12:36:24 (none) db[620]: DbLoadGeneric TvStatus=0x30012 near GenBatch: min=4 max=6 failed while nproc=790 item#=788 id=112699950 ty=50 nBadErr=3 lastBadErr=TvStatus=0x30012
    Dec 10 12:36:24 (none) db[620]: DbLoadGeneric TvStatus=0x30012 near GenBatch: min=0 max=6 failed while nproc=790 item#=788 id=112699950 ty=50 nBadErr=4 lastBadErr=TvStatus=0x30012
    Dec 10 12:36:24 (none) db[620]: DbLoadGeneric TvStatus=0x30012 near GenBatch: min=0 max=17 failed while nproc=790 item#=788 id=112699950 ty=50 nBadErr=5 lastBadErr=TvStatus=0x30012
    Dec 10 12:36:24 (none) db[620]: DbLoadGeneric TvStatus=0x30012 near GenBatch: min=0 max=50 failed while nproc=790 item#=788 id=112699950 ty=50 nBadErr=6 lastBadErr=TvStatus=0x30012
    Dec 10 12:36:24 (none) db[620]: DbLoadGeneric TvStatus=0x30012 near GenBatch: min=0 max=150 failed while nproc=790 item#=788 id=112699950 ty=50 nBadErr=7 lastBadErr=TvStatus=0x30012
    Dec 10 12:36:24 (none) db[620]: DbLoadGeneric TvStatus=0x30012 near Gen:end while nproc=790 item#=788 id=112699950 ty=50 nBadErr=8 lastBadErr=TvStatus=0x30012
    Dec 10 12:36:24 (none) db[620]: DbLoader ProcessOneGroupItem TvStatus=0x30012 near nproc=790 item#=788 id=112699950 ty=50 nBadErr=8 lastBadErr=TvStatus=0x30012
    Dec 10 12:36:24 (none) db[620]: DbLoadGeneric TvStatus=0x30012 near Group ProcessOneGpItem while nproc=790 item#=788 id=112699950 ty=50 nBadErr=9 lastBadErr=TvStatus=0x30012
    Dec 10 12:36:24 (none) db[620]: DbLoader Unpack=/var/packages/5000-p17375-tgroup-v236.snow.bnd: Processing TvStatus=0x30012
    Dec 10 12:36:24 (none) db[620]: DbLoader FinishedLoading(Unpack=/var/packages/5000-p17375-tgroup-v236.snow.bnd): nAction=811/825 nBatch=790 nBatchTrans=790  nBadBatch=7 nproc=790 item#=788 id=112699950 ty=50 nBadErr=9 lastBadErr=TvStatus=0x30012
    Dec 10 12:36:24 (none) db[620]: DbLoader Unpack=/var/packages/5000-p17375-tgroup-v236.snow.bnd: Error Processing TvStatus=0x30012
    Dec 10 12:36:24 (none) db[620]: DbLoader DbLoad failed to process file=/var/packages/5000-p17375-tgroup-v236.snow.bnd err=x30012
    Dec 10 12:36:24 (none) avalPP[620]: DBLoad Failed with errcode x30012!
    Dec 10 12:36:24 (none) AvalDbLoader[620]: Enabling gc
    Dec 10 12:36:24 (none) SoftwareLoader[620]: TvStatus=0x30012 SoftwareLoaderAvalTraits reportError
    Dec 10 12:36:24 (none) AvalBlockIoUnpacker[620]: sFile=80898 sBlock=16368 nCallRead=14026 nByteRead=7165 curBlockHit=7160 prevBlockHit=0 blockRead=6
    Dec 10 12:36:24 (none) avalPP[620]: file=5000-p17375-tgroup-v236.snow.bnd (3) PostProc returns FAILURE_00030012 (30012)
    Dec 10 12:36:24 (none) avalPP[620]: StartDirectory failed, returned error <0x30012>
    Dec 10 12:36:24 (none) avalPP[620]: CLEARING OUT ANY TROUBLED DIRECTORIES
    Dec 10 12:36:24 (none) avalPP[620]: Removing dead directory <0x5ee47660>
    Dec 10 12:36:24 (none) avalPP[620]: NukeFromDisk returns <0>
    Dec 10 12:36:24 (none) avalPP[620]: DONE CLEARING OUT TROUBLED DIRECTORIES: bool retval=0
    Dec 10 12:36:24 (none) comm[620]: There went Avalanche->Start! (err = 0x30012)
    Dec 10 12:36:24 (none) comm[620]: RemovePackages dir=/var/packages, Deleted: SM-tivopvr_production-v143.slice.gz SM-tivoffm_production-v33.slice.gz 5000-p17375-tgroup-v236.snow.bnd
    Dec 10 12:36:24 (none) aval_pp[620]: NukeOrphanedRecordings found 0 orphans
    Dec 10 12:36:24 (none) Call[620]: Err: TvStatus=0x30012 ProcessQueue failed
    Dec 10 12:36:24 (none) CallService[620]: Err: TvStatus=0x30012 Postprocessing failed
    Dec 10 12:36:24 (none) NetAgent[620]: flushing all queues
    Dec 10 12:36:24 (none) comm[620]: BackhaulStatus: type=1 hserver=1 tried=0 ok=1
    Dec 10 12:36:24 (none) LogMgr[620]: Reverting private logs
    Dec 10 12:36:24 (none) CallService[620]: Cleanup finished
    Dec 10 12:36:24 (none) LogMgr[295]: Received the revert complete event
    Dec 10 12:36:24 (none) PhoneHome[620]: TvStatus=0x30012 CallService done
    The rest of the log file for that connection attempt can be found here.

    Any help appreciated, thank you.
    Last edited by pneumatic; 11-12-2017 at 08:05 PM.

  2. #2
    According to this, 0x30012 error may indicate the guide data needs to finish indexing first. Perhaps there is a telnet command that can force indexing to take place?

    edit: saw this http://www.oztivo.net/twiki/bin/view.../ForceIndexing but it seems to be for series 1 and I can't find a force_index.tcl, if it even exists on TivoHD.
    Last edited by pneumatic; 11-12-2017 at 10:53 PM.

Similar Threads

  1. Non G-Zipped XML file?
    By nicko.dvz in forum TV Guide Issues
    Replies: 4
    Last Post: 05-02-2010, 04:39 PM
  2. Having problems with file transfer
    By Kevin in forum Australian TiVoHD
    Replies: 13
    Last Post: 03-10-2009, 08:38 AM
  3. FTP'ing daylight saving file
    By tonys in forum New Zealand General Forum
    Replies: 4
    Last Post: 26-09-2007, 01:11 PM
  4. Loading a tcl file
    By kwijibot in forum Question and Answer Forum
    Replies: 5
    Last Post: 27-05-2006, 06:03 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •