IR Codes for Sky KAON NS1120

[Ray]

Thanks both. I tried some of the settings and managed to get some strange video effects. No improvement though so returned to original.

SignalSource 305471/2261 {
DBSRemoteMethod = 2
Headend = 1319872/-1
Channel = REMOVED as a lot
Component = 2172/-1
CableBoxCodeNum = 29994
TunerDigitDelay = 20
UnattendedTunerDigitDelay = 400
VariableBitrate = 1
SignalType = 3
Connector = 7
LineupType = 1
RecieverNumDigits = 1
}

The Sky codes are the old UK ones - at least explains where they all came from. Thanks for that anyway.

I have not successfully recorded a programme automatically by TiVo sadly. Always misses a digit or doubles one up. I tried setiing my Philips up but no luck there at all (no surprise as I could never get the old box to work with it). I tried an IR resender to see if a signal boost might help as the IR blaser needs to be close to the box whereas the remote works far away. No joy there though the Sky remote does rebroadcast ok. Still a couple of ideas, building a foil shield around the IR blaster (but then remote will not work) and then maybe some tweaks to the IR codes to see if I can get them matching the Sky more closely.

As for the MySky box - getting a better handle on the Series Link but it can be problematic. Still want TiVo, maybe build a robot working on IR codes to press the Sky remote buttons?

[Islander]

Finished translator info here: http forums.oztivo.net/showthread.php?2051-Austar-Flinders-Mystar-Advice&highlight=austar

Also I have been bludgeoned by Sky to upgrade next Friday after putting them off several times. The word is they all have to be upgraded by Xmas.