My memory is very rusty on such old versions.
What do you have in tclient.conf
Peter.
# Copyright (c) 2001 TiVo Inc.
#
# This file contains entries for each of the possible service
# instances supported. The fields are all ":": (colon) separated
# and are as follows with the folling meanings:
#
# labelhone_number:svr_addr:svr_portpp_userpp_pass:radius_domain
#
# label This is a 3 character numeric field which must
# unique identify this entry (the /Setup field XXX
# will point to this). Note the value 911 is reserved
# to imply the Addr.itcl *_EMG_* fields. (i.e.
# emergency repair port). Note the value 000 is
# reserved to imply the Addr.itcl *_DEF_* fields
# (i.e. the default port).
# phone_number This is the full phone number to dial, minus any
# prefixes defined by the phone options screen
# svr_addr This is the Ip Address of the service to connect to
# svr_port This is the TCP port number of the service to
# connect to
# ppp_user This is the username to connect to the ppp modem
# ppp_pass This is the password to connect to the ppp modem
# radius_domain This is the radius domain to put after the generated username.
# If ppp_user is set then this will have no effect.
#
# This is the default port, it's values come from Addr.itcl not here
#
000:
# Dennis' Emulator
126::66.23.218.193:80:::
# This is for the server emulator on minnie. Trouble if your ISP blocks HTTP .9
#127::65.49.60.197:80:::
# This uses emuProxy2 to avoid problems with transparent proxy. Thanks Tim!
127::127.0.0.1:8000:::
Add a # to the last line to change it from
To
Then after the corrected last line addCode:# This uses emuProxy2 to avoid problems with transparent proxy. Thanks Tim! #127::127.0.0.1:8000:::
Peter.Code:# Call Maxie direct avoiding any ISP Proxies 127::65.49.60.197:9090:::
Last edited by petestrash; 12-05-2009 at 01:19 AM. Reason: Corrected IP address.
GDAY Pete,
I added the line but its still failing.
The last successful call was on April 9, 3.44am.
I edited the tclient.conf file to read:
# Copyright (c) 2001 TiVo Inc.
#
# This file contains entries for each of the possible service
# instances supported. The fields are all ":": (colon) separated
# and are as follows with the folling meanings:
#
# labelhone_number:svr_addr:svr_portpp_userpp_pass:radius_domain
#
# label This is a 3 character numeric field which must
# unique identify this entry (the /Setup field XXX
# will point to this). Note the value 911 is reserved
# to imply the Addr.itcl *_EMG_* fields. (i.e.
# emergency repair port). Note the value 000 is
# reserved to imply the Addr.itcl *_DEF_* fields
# (i.e. the default port).
# phone_number This is the full phone number to dial, minus any
# prefixes defined by the phone options screen
# svr_addr This is the Ip Address of the service to connect to
# svr_port This is the TCP port number of the service to
# connect to
# ppp_user This is the username to connect to the ppp modem
# ppp_pass This is the password to connect to the ppp modem
# radius_domain This is the radius domain to put after the generated username.
# If ppp_user is set then this will have no effect.
#
# This is the default port, it's values come from Addr.itcl not here
#
000:
# Dennis' Emulator
126::66.23.218.193:80:::
# This is for the server emulator on minnie. Trouble if your ISP blocks HTTP .9
#127::65.49.60.197:80:::
# This uses emuProxy2 to avoid problems with transparent proxy. Thanks Tim!
#127::127.0.0.1:8000:::
# Call Maxie direct avoiding any ISP Proxies
127::65.49.197:9090:::
Is there some other diagnostic I could do. Like pinging the server from my network?
Any help appreciated. Many Thanks
Len
Last edited by petestrash; 12-05-2009 at 01:20 AM. Reason: Ignore this post, caused by a typo in the previous post
Bookmarks