Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: Daylight saving time changed on wrong date...

  1. #1

    Daylight saving time changed on wrong date...

    My tivo looks like it changed off daylight saving time on the old date, not the new one, i.e. next week.

    Any ideas on how to change the time?

    Thanks

  2. #2
    I had this problem this morning and fixed it by following the instructions here:

    http://minnie.tuhs.org/pipermail/ozt...ch/032814.html

    -Bruce

  3. #3
    Hi Bruce,

    Thanks for this - followed the instructions and when I enter the "fixtivotime" command it says command not found and the time is unchanged.

    Any ideas?

    Thanks


    [TiVo [p0] ~]# cd /
    [TiVo [p0] /]#
    [TiVo [p0] /]# rsync -rv 131.244.9.101:ztivo_timezones
    open_socket_out(132)
    open_socket_out(139)

    Welcome to the rsync server for the Unix Archive. If you are only interested
    in browsing the Unix Archive, then please see the list of mirrors at
    http://www.tuhs.org/archive_sites.html

    receiving file list ... done
    drwxr-xr-x 0 2006/01/06 23:57:36 .
    drwxr-xr-x 0 2006/01/06 23:57:45 hack
    drwxr-xr-x 0 2006/11/23 22:01:45 hack/zoneinfo
    drwxr-xr-x 0 2007/10/08 00:32:34 hack/zoneinfo/Australia
    -rw-r--r-- 0 2007/10/08 00:32:34 hack/zoneinfo/Australia/Adelaide
    -rw-r--r-- 0 2007/10/08 00:32:34 hack/zoneinfo/Australia/Brisbane
    -rw-r--r-- 0 2007/10/08 00:32:34 hack/zoneinfo/Australia/Broken_Hill
    -rw-r--r-- 0 2006/01/07 00:00:20 hack/zoneinfo/Australia/Canberra
    -rw-r--r-- 0 2007/10/08 00:32:34 hack/zoneinfo/Australia/Currie
    -rw-r--r-- 0 2007/10/08 00:32:34 hack/zoneinfo/Australia/Darwin
    -rw-r--r-- 0 2007/10/08 00:32:34 hack/zoneinfo/Australia/Eucla
    -rw-r--r-- 0 2007/10/08 00:32:34 hack/zoneinfo/Australia/Hobart
    -rw-r--r-- 0 2007/10/08 00:32:34 hack/zoneinfo/Australia/Lindeman
    -rw-r--r-- 0 2007/10/08 00:32:34 hack/zoneinfo/Australia/Lord_Howe
    -rw-r--r-- 0 2007/10/08 00:32:34 hack/zoneinfo/Australia/Melbourne
    -rw-r--r-- 0 2007/10/08 00:32:34 hack/zoneinfo/Australia/Perth
    -rw-r--r-- 0 2007/10/08 00:32:34 hack/zoneinfo/Australia/Sydney
    drwxr-xr-x 0 2006/05/12 04:17:33 hack/zoneinfo/Pacific
    -rw-r--r-- 0 2006/01/06 23:45:22 hack/zoneinfo/Pacific/Norfolk
    wrote 0 bytes read 0 bytes 0.00 bytes/sec
    total size is 0 speedup is 0.00
    [TiVo [p0] /]#
    [TiVo [p0] /]# fixtivotime
    bash: fixtivotime: command not found
    [TiVo [p0] /]#
    [TiVo [p0] /]#

  4. #4
    I fixed it - didn't run the last command but forced a daily call and it's corrected it so many thanks for your help.

  5. #5
    Join Date
    Apr 2004
    Location
    Perth, Western Australia
    Posts
    3,032
    For others following ths thread,

    The commands you need if you are NOT running Oztivo 1.6 or higher.

    Code:
    rw
    
    rsync -rv 131.244.9.101::oztivo_timezones  .     <- Note the final space then the dot!
    Do a Daily call.

    Peter.
    Please search this forum and our Website for your TiVo questions before starting a new thread. Thanks!

  6. Hi
    I have tried doing a Daily Call twice this morning, both calls said "Updating Time", both succeeded, but my TiVo's time is still an hour out.
    Has minnie been fixed to return the correct time?
    If not, is there a manual fix for this that won't get overwritten by the next Daily Call?

    This has caught a lot of people out. I must admit I didn't know the government had decided to change the day that daylight savings ended until my wife complained that none of her programs were recording last night! Luckily we keep our computes at work fully patched, so it hasn't been a problem here.

    Rob

  7. PS
    I am running OzTivo 1.6.2-20070128 on the TiVo that I am trying to get straight (my other one is an older image, but I won't worry about that one until I can get this one right).
    Before I noticed what version I have, I thought maybe I need to try the command that Pete listed, and then do a daily call, but I'm still an hour out.

    Pete - you do know that the problem isn't that the TiVo's have noit updated their time at the end of Daylight savings, but that they have done it a week too soon, and we are trying to set them straight again?

    Cheers

    Rob

  8. #8
    Join Date
    Apr 2004
    Location
    Perth, Western Australia
    Posts
    3,032
    For users of 1.6 or above who have not kept their TiVo's up to date, you need to telnet in and do 'update_oztivo -y' or you should be able to do CLEAR 9 2 CLEAR from your remote.

    After either of those, a daily call should fix your time.

    Peter.
    Please search this forum and our Website for your TiVo questions before starting a new thread. Thanks!

  9. Thanks Pete

    That worked a treat.

    Rob

  10. #10
    Join Date
    Apr 2004
    Location
    Perth, Western Australia
    Posts
    3,032
    Glad to help.

    Peter.
    Please search this forum and our Website for your TiVo questions before starting a new thread. Thanks!

Similar Threads

  1. Time issues with Daylight Saving and Guide Time
    By Ray in forum New Zealand General Forum
    Replies: 4
    Last Post: 06-04-2010, 06:55 AM
  2. Tivo has wrong Date/Time after ever Daily Call
    By twiststop in forum Question and Answer Forum
    Replies: 7
    Last Post: 07-03-2010, 05:56 AM
  3. Daylight saving time in NZ
    By hh75 in forum New Zealand General Forum
    Replies: 6
    Last Post: 30-09-2008, 03:55 PM
  4. Daylight saving time...
    By neilp in forum New Zealand General Forum
    Replies: 2
    Last Post: 18-03-2008, 07:31 PM
  5. Time setting in daily call making date wrong
    By gazman88 in forum Question and Answer Forum
    Replies: 25
    Last Post: 18-04-2007, 11:09 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •