The attached palmod and palmod config can be used to configure this. A new option (s_audio) has been added. If this is set to 1 then SCART1 audio input is forced even if running with a MSP3410D.
It should be noted that this is not the official palmod and is a little different to that which is distributed with the OzTivo image. It should however be pretty compatible with all previous config files.
Updating palmod can stick your machine into a reboot loop if something goes wrong, so I would suggest you do something like that which is outlined here.
The "bin" file just contains the binaries (palmod and palmod_config) whereas the "src" file contains both the binaries and the source code. After making the setting by either using the Audio options menu under palmod_config, or by adding a s_audio=1 to your /etc/palmod.conf file you will need to reload palmod (or reboot).
Bookmarks