Issues with rc.sysinit.local

**JustinD** · 12-01-2007, 07:00 AM

Based on very useful help here previously I setup rc.sysinit.local to automatically start mfs_ftp when I reboot the tivo. It has worked great, except that I recently added to the file so that it would start the screensaver also. When I did this mfs_ftp no longer automatically starts. Does anyone know what I could have done wrong?

I actually also left a post on the email list regarding this but I think it was a little too cryptic on hindsight.

thanks,

**TimesOwn** · 12-01-2007, 12:26 PM

Why not post your new config?

**JustinD** · 12-01-2007, 02:04 PM

I dont' have access to my config at the moment, but it is pretty much:

# MFS FTP DAEMON
/var/mfs_ftp/mfs_ftp.tcl &

# SCREENSAVER
/hack/tivowebplus/component/screensave -t 60 >/dev/null 2>&1 &

I am not sure what the exact screensave address is, but you get the idea. The screensaver is starting on reboot but not mfs.

**TimesOwn** · 12-01-2007, 07:43 PM

Perhaps installing in the specified directory may help?
/var/hack/bin/screensave -t 60 >/dev/null 2>&1 &
instead of
/hack/tivowebplus/component/screensave?

**JustinD** · 12-01-2007, 09:26 PM

thanks for the thoughts. Someone on the email list worked it out. It was that I needed a blank line in-between the two.

**JustinD** · 10-03-2007, 10:25 PM

I seem to have the same problem again. The local file will not startup mfs_ftp on a reboot. I have checked the file is executable and the screensave module works on it, but mfs. If I manually startup mfs through putty it works (and with the same command)

My local has the following in it:

# MFS FTP DAEMON
/var/mfs_ftp/mfs_ftp.tcl &

# SCREENSAVE DAEMON
/hack/TivoWebPlus/modules/screensave -t 60 >/dev/null 2>&1 &

Any thoughts?
thanks,

**petestrash** · 11-03-2007, 02:56 AM

Try swapping the commands around, or adding a sleep command between them.

Is there anything else you have done recently that would break it?

Peter

**JustinD** · 11-03-2007, 08:34 AM

I swapped the commands and that seems to have worked. Not sure why it stopped working - I have only performed the std updates to the image through the commands. Albeit that its a mystery your suggestion has worked. thanks,

**petestrash** · 11-03-2007, 07:02 PM

The mysteries of PC's

Peter.

**JustinD** · 15-03-2007, 10:44 PM

Once again it doesn't seem to start mfs_ftp. It did for a day but I had some forced reboots (power turned off) and it is not working, so I start the ftp through putty. I am open to suggestions.....