Results 1 to 9 of 9

Thread: A severe error has occured

  1. #1

    Cool A severe error has occured

    TiVo has been very stable for 2 years but recently had problems with the TiVo restarting. So decided to start again with the NZ image. Now I get "your recorder is starting up screen" followed by "Maintainace Mode" then the dreaded green "a severe error has occured" going around in loops. Have reimaged this with the same result. Could this be a failed hard drive? Whats the best next step from here? Any advice greatfully received.

  2. #2
    Join Date
    Aug 2004
    Location
    The Mainland
    Posts
    542
    Definietly sounds like hardware somewhere... most likely disk. Re-image again and watch to make sure the image unpacks the full eight hunded odd megs.

    Perhaps run a disk check over the disk, for example if its a segate grab the segate disktools and run a full check of the disk.

    Really just a process of elimination, we know the images are good. Did a couple myself today.

    Good luck.
    1 x Philips TiVo Series 1, Cachecard, 1 x 1TB SATA (with recent TradeMe sourced adaptor), Mk II Pal Tuner Mod, NZ Emulator, Previously Dual A/V Source, Now Pay Satellite
    2 x TiVo HD, Freeview, HNP, 2TB (WD-AV) jmfs upgraded
    1 x Thomson UK TiVo, Cachecard, 200GB, Testing Work

  3. #3
    You may be onto it. Although it said the image was successfull it flashed up "error truncating MFS volume"

    Since I can't hook this up to my windows box, what do you recommend to thrash out the hard drive?

  4. #4
    Join Date
    Aug 2004
    Location
    The Mainland
    Posts
    542
    You should start by going to the hard disk manufacturers website and downloading their utility. Usually these are bootable disk utilities. So in the same way you imaged the disk originally, run the tests on it .. eg unhook windows disk, hook up problem disk boot from utility floopy and run tests. In some cases the manufacturers original utilities can detect and mark sectors bad, this may help.

    When you have completed the testing, reboot the installer image and re-image watching the MFS restore part closely. Then fingers crossed.
    1 x Philips TiVo Series 1, Cachecard, 1 x 1TB SATA (with recent TradeMe sourced adaptor), Mk II Pal Tuner Mod, NZ Emulator, Previously Dual A/V Source, Now Pay Satellite
    2 x TiVo HD, Freeview, HNP, 2TB (WD-AV) jmfs upgraded
    1 x Thomson UK TiVo, Cachecard, 200GB, Testing Work

  5. #5
    Well that was interesting. Seagate tells me the drive is fine. Looked a little harder at the PC thats doing the image, and find that it isn't recognising the size of the drive correctly. (Its pretty old) My main PC does but it doesn't boot up the knoppix CD, the screen goes blank after the logo page. Hence why I was using the old one.

    Have you struck this one before? (Technically hasn't been a great weekend)
    As allways any assistance would be appreciated.

  6. #6
    Join Date
    Aug 2004
    Location
    The Mainland
    Posts
    542
    Sorry, I've never had an issue with imaging. The only suggestion I can give is to remove any peripherals you can from your main PC to see if anything removable is holding up the boot process. And perhaps check knoppix on the web and see if there are known issues/fixes with your hardware config.
    1 x Philips TiVo Series 1, Cachecard, 1 x 1TB SATA (with recent TradeMe sourced adaptor), Mk II Pal Tuner Mod, NZ Emulator, Previously Dual A/V Source, Now Pay Satellite
    2 x TiVo HD, Freeview, HNP, 2TB (WD-AV) jmfs upgraded
    1 x Thomson UK TiVo, Cachecard, 200GB, Testing Work

  7. #7
    Join Date
    Apr 2004
    Location
    Perth, Western Australia
    Posts
    3,037
    Failing that try the new OzTiVo 1.6.2 image.

    It allow choice of emulator (NZ) through the menus and the installer is a little more friendly to a variety of PC's that wouldn't work before.

    The only thing is I'm not aware of anyone in NZ testing this image for use there, though thing like choice of emulator and NZ postcodes have been added.

    Peter
    Please search this forum and our Website for your TiVo questions before starting a new thread. Thanks!

  8. #8
    Join Date
    May 2004
    Location
    Victoria
    Posts
    1,239
    Apart from what has already been suggested I can't offer any other advice except that if you still have no joy then try another hard disk. Anything from 4GB and up will do as a test hard disk.
    Darren King
    OzTiVo Repairs and Modifications
    If your TiVo requires repairs or modifications
    then visit: http://kingey1971.wix.com/tivorepairs

    NOW ALSO REPAIRING FETCH TOO!

  9. #9

    Talking All Sorted Now Thanks

    Took off across town and comendered a friends PC all went sweet TiVo indexing as we speak. (or type)
    Thanks again for the assistance, it saved me buying a new hard drive.

Similar Threads

  1. S03 error on setup
    By petercad in forum Australian TiVoHD
    Replies: 7
    Last Post: 27-04-2018, 07:23 PM
  2. Mounting error.....
    By WrightP in forum Question and Answer Forum
    Replies: 12
    Last Post: 07-01-2009, 09:00 PM
  3. TMK Fatal error
    By fale_7 in forum Question and Answer Forum
    Replies: 5
    Last Post: 13-10-2008, 08:31 PM
  4. tivoweb error
    By scroll in forum Question and Answer Forum
    Replies: 2
    Last Post: 10-06-2004, 08:37 AM
  5. Severe error (Green Screen Of Death) with latest slice
    By brucer in forum New Zealand TV Guide Issues
    Replies: 11
    Last Post: 23-05-2004, 08:12 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •