Hi Larry, and welcome.
This is for one of two reasons:
1. Have you tried rebooting the unit a few times, and when you reboot do you still get the OzTiVo "Starting Up...." screen or the OzTiVo "Maintenance Mode" screen. This is the SECOND screen you will see, not the one you immediately see after applying power.
2. If you have already done step 1 and this does not help then do a search on the oztivo website at www.oztivo.com for "warped clock" and follow the directions therein to verify you do not have a warped clock condition.
Here, I'll make it easy for you as here is a direct link to a search result with the keywords "warped;clock": http://131.244.9.101/twiki/bin/searc...eb=on®ex=on
Bookmarks