Results 1 to 5 of 5

Thread: Unable to telnet & TivoWeb

  1. #1
    Join Date
    Nov 2004
    Location
    Brisbane
    Posts
    32

    Unable to telnet & TivoWeb

    Hi all,

    My Tivo has recently developed some new tempremental tricks. I am now unable to acess my Tivo via Telnet or TivoWeb.

    My tivo is still making daily calls via internet, so the internet & network connections are fine. I'm hoping a reimage is not called for.

    Anyone with any ideas to fix this problem?

    Cheers

    John
    Phillips HDR312 Series 1 TiVo
    CacheCard Network Card, 200gb Western Digital HD, OzTiVo 1.3 Image
    Slices: Foxtel Cable Digital

  2. #2
    Join Date
    Feb 2005
    Location
    Israel
    Posts
    45

    I too am unable to telnet

    I have a similar problem.

    After installing Wingate on my PC, and connecting to the TiVo via a
    serial cable, I was able to telnet to the TiVo. It was then set up to use
    the internal modem for connections.
    I changed the settings back to the defaults (dial prefix 401 and no
    dial up number, username and password).
    Now, I cannot telnet to my TiVo any more (I am not sure it is related
    to the changes I made, as Lagomatic did not change anything).
    I was able to run Guided Setup, so the TiVo can connect to the outside
    world, but when I telnet I get "connection refused". I am using the Putty
    program (on a Win XP machine).
    Another problem is that the TiVo does not always connect to the PC
    when it boots (about 50% of the times). I am not sure why. Is there a
    way to initiate the connection from the PC?

    Thanks,

    Gideon.

  3. #3
    Join Date
    Apr 2004
    Location
    ACT
    Posts
    134
    Hi John & Gideon,

    John have you tried rebooting by cycling the power?

    If that doesn't work then you can use a serial cable (always handy to have around for this sort of situation) to get to the "command prompt":

    http://minnie.tuhs.org/twiki/bin/vie...ertermWithTiVo

    Gideon your dial prefix needs to be set to ,#401 . The , and # are significant. You could use the above technique to connect and change it.

    Cheers, Dave.
    Living Room: US Philips HDR112, Seagate 200Gb, OzTiVo Image v1.5 (20051128), CacheCard (no RAM), Kross STB
    Rumpus Room: US Philips HDR31202, Seagate 120Gb, OzTiVo Image v1.6, CacheCard (no RAM), Tuner Mod, Dual Input Mod
    Additional Hacks: Re-order Season Passes

  4. #4
    Join Date
    Feb 2005
    Location
    Israel
    Posts
    45

    Hyperterminal does not work

    Thanks Dave,

    I have just discovered that TivOWeb works for me.
    I also discovered that PuTTY works if I chose the telnet
    protocol rather than the SSH default. I am not sure how it
    was set in the past.
    I cannot get the Hyperterminal to work. I always get
    the message "Another program is using the selected telephony
    device".

    Thanks,

    Gideon.
    Last edited by gideon_friedmann; 18-02-2005 at 01:17 AM. Reason: New findings

  5. #5

    unable to telnet or tivoweb

    I have found that if you are using XP system and tivo, web that occasionally XP will alter the ip address of tivo thereby making the last one you used invalid

    at the command prompt "ping 192.168.0.255" for the new address.

Similar Threads

  1. Unable to connect and update EPG: N17 Error
    By MHurwood in forum Australian TiVoHD
    Replies: 5
    Last Post: 25-12-2017, 06:15 PM
  2. Unable to record off Igloo STB
    By Islander in forum New Zealand General Forum
    Replies: 1
    Last Post: 10-01-2013, 04:18 PM
  3. Unable to get monitorIP to send email
    By Islander in forum New Zealand General Forum
    Replies: 10
    Last Post: 12-09-2007, 01:16 PM
  4. Unable to get into Phone Menu
    By imcdermid in forum Question and Answer Forum
    Replies: 2
    Last Post: 30-06-2006, 05:30 PM
  5. Unable to mount partition...
    By MrGadget in forum Question and Answer Forum
    Replies: 0
    Last Post: 23-08-2004, 10:01 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •