Results 1 to 6 of 6

Thread: TiVo-S3-Installer-0.6 stuck on 'Patching Kernel'

  1. #1
    Join Date
    Mar 2004
    Location
    Wellington, NZ
    Posts
    573

    TiVo-S3-Installer-0.6 stuck on 'Patching Kernel'

    Firstly, a hello.. It's been a while since I played around with TiVos.. originally with the Series 1 model (I imported two from the USA).

    I'm now having a play with a series 3 unit.

    I've created the boot USB and successfully have it starting up the TiVo-S3-Installer-0.6 and am following the instructions. However, prepping the disk it has got stuck on the screen

    Active kernel on /dev/sda/ is in partition
    /dev/sda
    Boot parameters are
    Patching Kernel

    It's been sitting here for some time, without asking for a root password to be created.

    I noted in windows with winmfs it could not see this drive either, although it works fine in the tivo and I can play the recordings (from 2017.. noice!)

    Thanks
    zollymonsta

  2. #2
    Join Date
    Mar 2004
    Location
    Wellington, NZ
    Posts
    573
    Its just now thrown an error

    Could not mount
    /dev/sda1 on
    /tmp/tivo_mount

  3. #3
    Join Date
    Mar 2004
    Location
    Wellington, NZ
    Posts
    573
    Aha.. brain dump... somehow overwrote the boot partition with MBR in windows. Resolved with WinMFS->Tools->Fix bootpage->Option1 and Option2

    Made backup to desktop. Restored to a Seagate 1TB drive and it asked if I wanted to expand, so I said yes (Original was 320gb). All Done.

    But it looks like this version of TiVoAPP isnt recognised... according to the error. So maybe this is an earlier, earlier version on the original drive. Correct thinking?

  4. #4
    Join Date
    Apr 2005
    Location
    New Zealand
    Posts
    272
    Welcome back.
    2 x S1 TiVos running, 1 x HD TiVo running, Several of each as spares. Current keeper of ORAC.

  5. #5
    Quote Originally Posted by zollymonsta View Post
    I've created the boot USB and successfully have it starting up the TiVo-S3-Installer-0.6 and am following the instructions.
    What did you have to do to create the USB? i found some instructions but the USB stick i created with unetbootin wont boot on my ryzen PC.. it just kicks me into the BIOS setup

  6. #6
    Quote Originally Posted by GrizzlyKiwi View Post
    What did you have to do to create the USB? i found some instructions but the USB stick i created with unetbootin wont boot on my ryzen PC.. it just kicks me into the BIOS setup
    I have since found out a UEFI machine like mine wont boot the USB stick and you need an older machine to work with

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •