Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: Time 30 minutes ahead on two modded Tivo HD's

  1. #1

    Time 30 minutes ahead on two modded Tivo HD's

    Hi all,

    I've modded two Tivo HD's this year, one mine and one for a local friend, and we're in Adelaide. They've both been running for a while now and we've noticed that the clock is 30 minutes fast on both units. I thought it might sort itself out, but it hasn't. So it's like the time zone is +10H UTC instead of +9.5H UTC.
    Anyone know where we correct this 30 minute time issue ?
    Cheers,
    Martin

  2. #2
    Join Date
    May 2004
    Location
    Victoria
    Posts
    1,239
    Did you set the postcode to the CBD for your state? In your case 5000?
    Darren King
    OzTiVo Repairs and Modifications
    If your TiVo requires repairs or modifications
    then visit: http://kingey1971.wix.com/tivorepairs

    NOW ALSO REPAIRING FETCH TOO!

  3. #3
    Join Date
    Nov 2017
    Location
    Melbourne, Victoria
    Posts
    184
    It is probably because of the postcode you used for Guided Setup on each TiVo. If postcode is between 5100 and 5999 then that would definitely explain the time difference - you should see clock 30 minutes fast and tv guide 30 minutes fast.
    If that is it (or you're not sure) then I suggest doing Guided Setup again and make sure you use postcode 5000 (for anywhere in South Australia).

  4. #4
    Quote Originally Posted by DavidKeegel View Post
    It is probably because of the postcode you used for Guided Setup on each TiVo. If postcode is between 5100 and 5999 then that would definitely explain the time difference - you should see clock 30 minutes fast and tv guide 30 minutes fast.
    If that is it (or you're not sure) then I suggest doing Guided Setup again and make sure you use postcode 5000 (for anywhere in South Australia).
    Thanks,
    Nope I used my local postcode. I must have missed that bit of info about CBD code.
    Can I run guided setup again without prerequisites, or do I need to clear or delete any info or files first ?
    Thanks,
    Martin

  5. #5
    Join Date
    May 2004
    Location
    Victoria
    Posts
    1,239
    Yes just run Guided Setup again and use 5000 as your postcode.
    Darren King
    OzTiVo Repairs and Modifications
    If your TiVo requires repairs or modifications
    then visit: http://kingey1971.wix.com/tivorepairs

    NOW ALSO REPAIRING FETCH TOO!

  6. #6
    Quote Originally Posted by Darren King View Post
    Yes just run Guided Setup again and use 5000 as your postcode.
    Yes this sorted it out. Took two goes to get the Guided Setup to properly complete though, it hung the first time after it said complete the first time.

    Hey a question.
    If devs have access to the code in the right place, why not make the guided setup just use the state level post code digit to set the boxes time zone, instead of all four digits ?
    i.e. 5 instead of 5XXX, truncate the uses post code to one digit and add the zeros back if 5000 is needed.

    Cheers,
    Martin

  7. #7
    Join Date
    Oct 2017
    Posts
    45
    Quote Originally Posted by mr.sneezy View Post
    Yes this sorted it out. Took two goes to get the Guided Setup to properly complete though, it hung the first time after it said complete the first time.

    Hey a question.
    If devs have access to the code in the right place, why not make the guided setup just use the state level post code digit to set the boxes time zone, instead of all four digits ?
    i.e. 5 instead of 5XXX, truncate the uses post code to one digit and add the zeros back if 5000 is needed.

    Cheers,
    Martin
    That won't work. Canberra has different programs from Sydney, but both have postcodes starting with 2.

  8. #8
    Join Date
    Nov 2017
    Location
    Melbourne, Victoria
    Posts
    184
    Quote Originally Posted by mr.sneezy View Post
    If devs have access to the code in the right place, why not make the guided setup just use the state level post code digit to set the boxes time zone, instead of all four digits ?
    i.e. 5 instead of 5XXX, truncate the uses post code to one digit and add the zeros back if 5000 is needed.
    I have made some changes to the way 5xyz and 6xyz postcodes are translated to time zones (for x>=1) which I think should work better. There are also minor code changes (should have no discernable impact) to 4xyz postcodes and DST handling (ie disabling DST) for 6xyz. And also supporting DST transitions 2018-2022 (previously only transitions up to April 2018 were coded).

    Note: I have not made any changes to how guide data works. I don't expect postcodes 5xyz or 6xyz (where xyz!=000) to work any better for guide data (which is a different issue) than they did before. So I still encourage South Australians to use postcode 5000, and West Australians to use postcode 6000, just as everyone else in Australia should use their state/territory capital city postcode (assuming your capital city has the same time that you do) when you do a guided setup, until further notice. Do we have anyone from places like Broken Hill, Eucla, Lord Howe Island (where time is different to the state capital) with a tivo?
    Last edited by DavidKeegel; 27-03-2018 at 10:00 PM.

  9. #9
    Join Date
    Nov 2017
    Posts
    40
    G'day David, Darren and All,

    Problem came up here in the West. At least in northern Perth suburbs. Ran out of programme data this morning.

    Tivos won't connect to the Tivo Service.

    Mine was ok yesterday, 'cos I did a few recordings last night, but all "to be announced" this morning.

  10. #10
    Quote Originally Posted by cpab View Post
    G'day David, Darren and All,

    Problem came up here in the West. At least in northern Perth suburbs. Ran out of programme data this morning.

    Tivos won't connect to the Tivo Service.

    Mine was ok yesterday, 'cos I did a few recordings last night, but all "to be announced" this morning.
    Yes I the same problem on both our Tivos, so might be a Perth thing. Last successful connection on Tuesday after that N18 failed while configuring error.

Similar Threads

  1. Replies: 1
    Last Post: 17-10-2018, 07:22 AM
  2. Modded TIVo keeps rebooting
    By Steve1959 in forum Question and Answer Forum
    Replies: 1
    Last Post: 04-05-2018, 04:43 PM
  3. MythTV - guide data 10 hours ahead
    By pseudonym in forum TV Guide Issues
    Replies: 2
    Last Post: 10-09-2006, 07:03 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •