Quote Originally Posted by RLSA View Post
I have two OzTiVos
Tivo1 has software version 11.3b8-01-2-633
TiV02 has software version 11.3b10.2017.10.11-1506-01-2-Z-633

Both work OK except that TiVo1 sometimes has a problem after a service connection. The connection, downloading and loading all progress normally but after the loading is finished there is no guide data available even though the status is shown as "succeeded" and it remains that way no matter how long I wait after the connection. (sounds a bit like the problem reported by "viewer" recently). However if TiV01 is restarted (NOT reset) then all the guide data appears normally. The problem occurs frequently but sometimes it works OK without the need for a restart. TiVo2 never exhibits this behaviour.

Has anyone else observed this?
Yes. A TiVo with 11.3b8 software needs to have a program called Ticketmaster running. I'll bet the times it says it does not have guide data the TiVo has booted and you see the message in red text on the "Almost there" boot screen "Not Loading Ticketmaster" but when you do boot the TiVo and it successfully has guide data it has white text saying "Loading Ticketmaster"

I assume that it could be fixed by updating the software in TiVo1. Does that require the whole process of installing the system software onto the hard drive as I did after Darren modded the unit. Is there now any easier way to update the software?
You can use a pre-modded 11.3b10 software image .tbk file and WinMFS to do it. That will then mean no Ticketmaster software required. That's the difference between 11.3b8 and 11.3b10.

Note my comment in the one post above about losing MAK if this TiVo still has one.