Hi Steve
That's a more detailed question than you emailed me so I will elaborate here more than just the "I dunno" I gave you in my email.
It is possible that the tuner you are using is only defaulting to "VHF low band" and nothing else. Some tuners need command switching between VHF low (Ch0 to Ch5), VHF high (Ch5a to CH11) and UHF. However unless you can land some documents on your particular tuner then I am tipping 99% it is not the same as the ALPS TMDG2 805A that are used in the UK Thompson TiVo and that I recommend for use in PAL tuner conversions. If you can get the documents then you could probably make a driver for it, otherwise you are probably stuck to channel 2 reception only.
Bookmarks