S1 Tivo resurrection after 3+ years in storage

[johnhedge]

Hi List,

I've just returned from 3+ years o/s and I've finally got my S1 Tivo out of storage, plugged in and turned on but it wont/cannot update/download any program data.

I updated to the latest version 1.6.2-20061109 before I left.

Running the update I get an error probably due to the wrong ip address;

update_oztivo -y
File system is now READ/WRITE.
Fetching new files from the oztivo Emulator, details shown below:
rsync -rvltpD 131.244.9.101:ztivo_1.6 . --exclude-from=/etc/update_exclude

Welcome to the rsync server for the Unix Archive. If you are only interested
in browsing the Unix Archive, then please see the list of mirrors at
http://www.tuhs.org/archive_sites.html

@ERROR: Unknown module 'oztivo_1.6'
rsync error: error starting client-server protocol (code 5) at /usr/src/tivo/rsync-2.6.7/main.c(1296) [receiver]
File system is now READ ONLY.

However it may be due to the file in the root dir being named upgrade_oztivo

I've changed the server from minnie to oztivo and I've tried to force the daily call without success. Reading some of the posts my ISP TPG seems to be mentioned re its proxy but I never used to have this problem before.

ps ax | grep emuProxy*
173 ? S 0:00 /hack/bin/emuProxyZA -s www.oztivo.net -p 80
249 p0 SW 0:00 grep emuProxy*

but emuProxyZA.conf ip address is # out

I can ping 65.49.60.197 from the Tivo.

Any help, guidance or ideas will be much appreciated.

TIA

John

[petestrash]

Take a look at this, to see if it helps you.

Peter.

[johnhedge]

Thanks Pete but that's where I got the info to do what I've tried so far.

Darren thinks I'm going to have to start afresh :-(

J

[petestrash]

That might be easiest if you have a combination of issues.

If it is only the TPG proxy stopping you, edit /etc/oztivo.conf under emulator port change from 80 to 9090.

Peter.

[petestrash]

That might be easiest if you have a combination of issues.

If it is only the TPG proxy stopping you, edit /etc/oztivo.conf under emulator port change from 80 to 9090.

Peter.

[johnhedge]

Does that mean removing the drive and finding some way of connecting it to a laptop?

[petestrash]

For the TPG issue or starting from scratch?

Scratch yes; you will need to use a PC (hard from a laptop)

For TPG look at this page and scroll down to "1. The easiest and generally best method"

Peter.

[johnhedge]

I sourced an old Dell.

I am now an expert at changing the HD (Seagate 250gig 7000.10) from Tivo to Dell many times as I'm not getting the image (1.6.2_20080604) to boot it seems as all I get is the welcome screen and the polite request to "wait a moment"......

Thoughts, suggestions and advice welcome.

TIA

John

[petestrash]

Dell PC's are a pain for some some linux Distros (including ours). Some of the drivers they use are not generic and will not install automatically.

I am travelling away from home fo a while, so can't really help.

Perhaps someone close to you might be able to help out or arrange to image the drive for you.

I think Darren King used to do this for a small fee, but not sure if he still does.

Peter.

[johnhedge]

Hi Peter,

Thanks for the explanation. Seems I've hit the wall.

I live in Turramurra 2074. If there's a member close by with the capability of putting the image onto my HD, I'd appreciate hearing from them.

J