Does your STB only accept 2 digits? If it accepts 3 or four, what happens if you set RecieverNumDigits to 3 or 4, does the leading digit get sent?
Hi All,
Just had to get a new STB as my Aldi Tevion suddenly stopped. I have created the IR slices OK. The one problem I have left is that if I select a channel from the live TV guide that has only one digit, all that gets sent is 0, instead of 07. Double digit channels are fine. I have set dbsetx to use 2 digits, but nothing changes.
The box is an Altech UEC DT2900
Can any one help ?
TIA,
Ian
Does your STB only accept 2 digits? If it accepts 3 or four, what happens if you set RecieverNumDigits to 3 or 4, does the leading digit get sent?
TiVo Series3 TiVoHD x2
OK, don't know what happened, but did the whole process again, and the box now works.
The following problems manifested themselves:
If you hold down a key for too log, it send the code multiple times i.e. if you hold down the 9 key it will change to 99 on the one push. This made capture quite tricky. The frequency it uses is 55, this took quite a while to work out.
Thanks for your help.
Moderator, the IR database gives me a broken link, is it still around, and I will upload the codes.
Ian
Have you created a login for the Wiki? You need one to be able access the IR database. I just tested and I was able to login.
You may also want to add your STB to this useful list http://oztivo.phoenixdigital.com/stb_browse.php
[QUOTE=imcdermid;16059Moderator, the IR database gives me a broken link, is it still around, and I will upload the codes.[/QUOTE]
The link to the IR database is http://www.oztivo.net/tivo-bin/irdatabase.cgi.
But as Skolink has said you will need to register on the OzTiVo Wiki before you can access that page. You can register @ http://www.oztivo.net/twiki/bin/view...kiRegistration
Peter.
Bookmarks