What is the version of OzTiVo are you using (you will find it in either /etc/oztivo_version or /etc/oztivo-version)?
Could you please give us some background, like did it just fail in the last couple of days etc.
Peter
Hi guys, Im sorry to hijack this thread somewhat but I think I am having the same problem as Melissa. Mods please move to a new thread if thats an issue.
I tried to edit the oztivo.conf file using Joe and I got this:
# OzTiVo menu configuration settings file
# Please do not edit this file
# Put the TiVo disk back in your PC to reconfigure
nic=TurboNet
ip=DHCP
mac=00:0B:AD:68:77:12
hostname=oztivo
modem=0
pppondss=0
netmask=
gateway=
ssid=
wep=
wepkey=
As you can see there is no emulatorport details to edit.
Did I get the wrong file. Is there some sort of step I should take to confirm that the ports are what is causing the failed service calls?
Many thanks.
Len
What is the version of OzTiVo are you using (you will find it in either /etc/oztivo_version or /etc/oztivo-version)?
Could you please give us some background, like did it just fail in the last couple of days etc.
Peter
Hi Peter
Apologies for the lack of details. It looks like it happened around the same time as melissa. (Im on iinet). Had no guide data last week and was away the week before which is when I think it happened.
Forced calls fail.
1.4beta-20050524 - is the version I am running. Bit old. But I dont have a PC to reimage a HD in (mac family).
Any ideas where I should start?
Many Thanks
Len
# Copyright (c) 2001 TiVo Inc.
#
# This file contains entries for each of the possible service
# instances supported. The fields are all ":": (colon) separated
# and are as follows with the folling meanings:
#
# labelhone_number:svr_addr:svr_portpp_userpp_pass:radius_domain
#
# label This is a 3 character numeric field which must
# unique identify this entry (the /Setup field XXX
# will point to this). Note the value 911 is reserved
# to imply the Addr.itcl *_EMG_* fields. (i.e.
# emergency repair port). Note the value 000 is
# reserved to imply the Addr.itcl *_DEF_* fields
# (i.e. the default port).
# phone_number This is the full phone number to dial, minus any
# prefixes defined by the phone options screen
# svr_addr This is the Ip Address of the service to connect to
# svr_port This is the TCP port number of the service to
# connect to
# ppp_user This is the username to connect to the ppp modem
# ppp_pass This is the password to connect to the ppp modem
# radius_domain This is the radius domain to put after the generated username.
# If ppp_user is set then this will have no effect.
#
# This is the default port, it's values come from Addr.itcl not here
#
000:
# Dennis' Emulator
126::66.23.218.193:80:::
# This is for the server emulator on minnie. Trouble if your ISP blocks HTTP .9
#127::65.49.60.197:80:::
# This uses emuProxy2 to avoid problems with transparent proxy. Thanks Tim!
127::127.0.0.1:8000:::
Add a # to the last line to change it from
To
Then after the corrected last line addCode:# This uses emuProxy2 to avoid problems with transparent proxy. Thanks Tim! #127::127.0.0.1:8000:::
Peter.Code:# Call Maxie direct avoiding any ISP Proxies 127::65.49.60.197:9090:::
Last edited by petestrash; 12-05-2009 at 01:19 AM. Reason: Corrected IP address.
GDAY Pete,
I added the line but its still failing.
The last successful call was on April 9, 3.44am.
I edited the tclient.conf file to read:
# Copyright (c) 2001 TiVo Inc.
#
# This file contains entries for each of the possible service
# instances supported. The fields are all ":": (colon) separated
# and are as follows with the folling meanings:
#
# labelhone_number:svr_addr:svr_portpp_userpp_pass:radius_domain
#
# label This is a 3 character numeric field which must
# unique identify this entry (the /Setup field XXX
# will point to this). Note the value 911 is reserved
# to imply the Addr.itcl *_EMG_* fields. (i.e.
# emergency repair port). Note the value 000 is
# reserved to imply the Addr.itcl *_DEF_* fields
# (i.e. the default port).
# phone_number This is the full phone number to dial, minus any
# prefixes defined by the phone options screen
# svr_addr This is the Ip Address of the service to connect to
# svr_port This is the TCP port number of the service to
# connect to
# ppp_user This is the username to connect to the ppp modem
# ppp_pass This is the password to connect to the ppp modem
# radius_domain This is the radius domain to put after the generated username.
# If ppp_user is set then this will have no effect.
#
# This is the default port, it's values come from Addr.itcl not here
#
000:
# Dennis' Emulator
126::66.23.218.193:80:::
# This is for the server emulator on minnie. Trouble if your ISP blocks HTTP .9
#127::65.49.60.197:80:::
# This uses emuProxy2 to avoid problems with transparent proxy. Thanks Tim!
#127::127.0.0.1:8000:::
# Call Maxie direct avoiding any ISP Proxies
127::65.49.197:9090:::
Is there some other diagnostic I could do. Like pinging the server from my network?
Any help appreciated. Many Thanks
Len
Last edited by petestrash; 12-05-2009 at 01:20 AM. Reason: Ignore this post, caused by a typo in the previous post
Bookmarks