Try rebooting your TiVo and give it another go.
Peter.
Hi,
I recently bought a HD STB (DGTEC HD5210). I tried to buy one that has an IR code on the list however I couldn't find one. So I thought that maybe one of the other DGTEC codes may work, well they didn't so now I am trying to capture the IR codes with my TIVO.
It took a while to try and understand the IR WIKI - Use the OzTiVo to Capture IR Remote Codes With the IrSliceCreator Program however I finally started to progress up until it came time to determine the target code length.
Basically when I selected "1. Determine target code length" nothing happened on the telnet screen and then eventually it showed...
Push one remote button at each prompt determination code length:
Push same button again
BUG IN DYNAMIC LINKER ld.so: dynamic-link.h: 46: elf_get_dynamic_info: Assertion `! "bad dynamic tag"' failed!
I thought well I'll try and just follow the example in the WIKI so I selected the parameters 43 5 5 29995 DGTEC_5210
So next I tried to capture key 1 when the same message appeared...
BUG IN DYNAMIC LINKER ld.so: dynamic-link.h: 46: elf_get_dynamic_info: Assertion `! "bad dynamic tag"' failed!
Am I doing something wrong or is it a problem with the STB. I was doing this in a dark room except for the light coming from the TV.
I have about 2 weeks to return this STB and then I will try to buy a more suitable one. Would that be a better way to go about it?
after rebooting a couple of times the exact same thing keeps happening. Now I don't even have time to press buttons on the remote as the lines
Push one remote button at each prompt determination code length:
Push same button again
BUG IN DYNAMIC LINKER ld.so: dynamic-link.h: 46: elf_get_dynamic_info: Assertion `! "bad dynamic tag"' failed!
come up straight away.
/lib/ld.so.1
eden
It's a US Tivo
2x Phillips Tivo Series 1
I can't recreate the error. Try downloading the irSliceCreator.zip package again.
Make sure you follow all the steps.
Peter.* cd /hack/etc
* mkdir ircodes
* cd ircodes
* (Then FTP the 2 zip files to this directory on your OzTiVo)
* unzip irSliceCreator.zip
* unzip powerIRTools-0.1.zip
* chmod a+x irSliceCreator.sh
* cp irlock /hack/bin (This will put irlock in a directory that is in your PATH)
Bookmarks