I'll probably be shot.. but moving to Aus with my TIVO! Any ideas?

**tatch76** · 06-11-2008, 11:22 PM

Didn't run a clear and delete as wife will kill me if I lose all of her LOST episodes!

etc/oztivo.conf is:

# OzTiVo menu configuration settings file
# Please do not edit this file
# Run the nic_config_tivo tool to reconfigure
nic=TurboNet
ip=DHCP
mac=00:0B:AD:87:17:93
timing=3
hostname=oztivo
emulator=www.oztivo.net
emulatorport=9090
netmask=
gateway=
ssid=
wep=
wepkey=

**petestrash** · 06-11-2008, 11:32 PM

There is no way of getting the TiVo working without running a Clear and Delete all.

Each emulator is setup very differently and the TiVo cannot have information from an old emulator in it when making a call.

It's the same just moving between the 2 emulators in New Zealand, if you move to a different emulator you must run a clear and delete all for it to work properly.

Peter.

**tatch76** · 06-11-2008, 11:48 PM

So probably a dumb question, but any way I can save current programs if I run clearanddelete.tcl ?

zaprequest.tcl.gz ?

**tatch76** · 07-11-2008, 12:03 AM

Any chance this could be at the root of my problem?

tclient.conf file:

# This is the default port, it's values come from Addr.itcl not here
#
000:
# Dennis' Emulator
#126::66.23.218.193:80:::
# This is for the server emulator on minnie. Trouble if your ISP blocks HTTP .9
127::210.48.107.133:8000:::

# This uses emuProxy2 to avoid problems with transparent proxy. Thanks Tim!
#127::127.0.0.1:8000:

**petestrash** · 07-11-2008, 01:46 PM

This is stopping you from connecting to the emulator, but it is just as well, because you can still download the shows from your TiVo. There is a good chance once that is changed the mfs will become corrupted by the two emulators.

You can try playing with Zaprequest, but I would not rely on it alone for saving your shows. In the US when zaprequest is used it still calls the same emulator. I have never tried to see what the result would be if used with a different emulator.

Peter.