Results 1 to 10 of 12

Thread: widescreen

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    widescreen

    All,

    My Sky sat box is connected to my Sony CRT WS TV via composite video. When Sky plays content in 4:3 then the TV shows black bars on each side, when Sky plays WS content then the TV recognises it as anamorphic content (assume the WSS signal is sent via line 23 (or 21??)) and stretches the image.

    Will the Tivo support this WS auto switching or do I need to manually change the TV when WS content is displayed??

    Thanks

  2. #2
    Anyone??? Does anyone have the Tivo automatically changing the TV setting to cater for the anamorphic widescreen??? Is Tivo the wrong solution I'm looking for and so should go back to looing at a PC based PVR???

  3. #3
    Join Date
    Mar 2005
    Location
    Hamilton, NZ
    Posts
    196
    From my freeview box (I don't have sky sat), if the broadcast is in 16:9 then it fills the 16:9 TV when played from tivo. Similarly 4:3 displays with black bars on either side when played back so the aspect ratio is correct. I'm not entirely sure if it is using the WS signal, or if the STB is just inserting black bars into the video. I would assume that sky works ok or there would probably be a large number of posts asking how to fix it.

    There is also mention of enabling the widescreen signal in the bottom of this page:
    http://www.tuhs.org/twiki/bin/view/F...ormalTVscreens

  4. #4
    Join Date
    Dec 2005
    Location
    Christchurch, New Zealand
    Posts
    463

    widescreen

    If you have a widescreen TV, why not just set the Sky box to widescreen output which the TiVo will record, and when played back will look fine on your widescreen TV. The TiVo menus will look squashed but that doesn't really matter.

    If there's any non-WS content, then the sky box should just automatically add black bars at the sides (since it thinks you have a widescreen TV). If not then some Motorola firmware developer needs a clip over the back of the head.

  5. #5
    yep, that's what I do with my tivo's, it's the easy solution..

    Ian

  6. #6
    OK just finished a rebuild after Sky swapped my crappy Motorola DTH335 for a nice Pace box. I'm running the lastes 0ztivo build and have done the update form the bash prompt.
    I have;
    Pace Sky STB set for a 16:9 output connected to a Sony WS CRT TV via composite. The TV switches from "Normal" to "Full" when a WS program is displayed, and back to "Normal" when a normal program is displayed.
    With Tivo, it would just display everything in normal with no switching to "Full" mode and so any WS program was horizontally squashed.

    I added the 2 lines to the end of /etc/rc.d/rc.sysinit.author;
    iicset 0x8c 0x26 0x7
    iicset 0x8c 0x27 0x80
    And now Tivo sets the TV to "Full" mode for everything; including normal 4:3 programs and so they are stretched.

    What am I missing?????

  7. #7
    Join Date
    Dec 2005
    Location
    Christchurch, New Zealand
    Posts
    463
    Quote Originally Posted by kt_nz View Post
    With Tivo, it would just display everything in normal with no switching to "Full" mode and so any WS program was horizontally squashed.

    And now Tivo sets the TV to "Full" mode for everything; including normal 4:3 programs and so they are stretched.
    That's what I would expect to happen.

    If the image is filling the screen (no black bars) for both WS and normal content, how do you expect the TV to tell the difference? There is no extra signal to "tell" the TV that it is WS or normal (4:3) content. It just has to decide for itself based on if there are black bars at the top or side or none (in the signal I mean, regardless of whether they are being displayed).

    If I had your setup, I would have it set so that black bars are added to the sides for 4:3 content, and set the TV to always be on WS mode.

  8. #8
    Join Date
    Apr 2004
    Location
    Perth, Western Australia
    Posts
    3,037
    You could try:

    Put the following lines in /etc/rc.d/rc.sysinit.author

    iicset 0x8c 0x26 0x7
    iicset 0x8c 0x27 0x80

    Or to disable widescreen:

    iicset 0x8c 0x26 0x0
    iicset 0x8c 0x27 0x0

    Peter.
    Please search this forum and our Website for your TiVo questions before starting a new thread. Thanks!

  9. #9
    Join Date
    Mar 2005
    Location
    Hamilton, NZ
    Posts
    196
    Quote Originally Posted by petestrash View Post
    You could try:

    Put the following lines in /etc/rc.d/rc.sysinit.author

    iicset 0x8c 0x26 0x7
    iicset 0x8c 0x27 0x80

    Or to disable widescreen:

    iicset 0x8c 0x26 0x0
    iicset 0x8c 0x27 0x0

    Peter.
    That was tried in the earlier posts. I think the problem he is having is that command forces it one way or the other, instead of correctly switching to match the recorded program.

  10. #10
    Join Date
    Apr 2004
    Location
    Perth, Western Australia
    Posts
    3,037
    Sorry, I only read today's post.

    Yes it will only set ws on or off.

    I don't believe the ws flag is recorded by the mpeg stream despite the encoder being capable of handling it.

    Peter.

    Peter.
    Please search this forum and our Website for your TiVo questions before starting a new thread. Thanks!

Similar Threads

  1. 16:9 Widescreen
    By MikeJ in forum Question and Answer Forum
    Replies: 1
    Last Post: 08-03-2005, 03:10 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •