Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 26

Thread: Use nzTivo Image (based on 1.5) or OzTivo 1.6.2 ??

  1. #11
    Join Date
    May 2004
    Location
    Victoria
    Posts
    1,239
    "crash" as in freeze or reboot?

    If you mean freeze then edit the /etc/oztivo.conf file from timing=3 to timing=16 and try again. I *think* the nz image still has an oztivo.conf file. You could also try using nic_config_tivo and altering the timing setting there but the current oztivo image has issues with the setting actually changing. Not sure about the nz image but worth a shot I suppose.

    If you mean reboot then I have no idea.
    Last edited by Darren King; 14-08-2007 at 07:31 PM.
    Darren King
    OzTiVo Repairs and Modifications
    If your TiVo requires repairs or modifications
    then visit: http://kingey1971.wix.com/tivorepairs

    NOW ALSO REPAIRING FETCH TOO!

  2. #12
    Join Date
    Mar 2005
    Location
    Hamilton, NZ
    Posts
    196
    Quote Originally Posted by NoSignal View Post
    Its a pity about the modem/lan exclusivity. I don't have broadband at home, but wanted to be able to connect to tivo via lan, so I got a TurboNet card. At the time, you could use both.
    Sorry if I gave you the wrong impression here - you CAN use both a turbonet card and modem simultaneously, but you have to edit a couple of files manually instead of using nic_config_tivo. Let me know if you want help with this.

    To figure out your connection problem, check the log at /var/log/tclient
    You may also need to use my hack depending on which ISP you are connecting to.

    It sounds like you may have bigger problems to worry about first though.

  3. #13
    Join Date
    Aug 2007
    Location
    Christchurch
    Posts
    51
    Quote Originally Posted by Darren King View Post
    "crash" as in freeze or reboot?...
    As in freeze. I did choose "Failsafe" in nic_config_tivo which is "16" from memory, but the setting changes you say? Well, I've re-imaged and now I don't want to touch nic_config_tivo because that seems to make the modem fail permanently, regardless of later editing of the conf files or re-running nic_config_tivo

    So far, I have only used the ozTivo image.

    US Phillips HDR112 TIVO, TurboNet, PAL Tuner, 80gb HDD. Work, Fun.

  4. #14
    Join Date
    Aug 2007
    Location
    Christchurch
    Posts
    51
    Quote Originally Posted by catdog View Post
    Let me know if you want help with this.
    Awsome. Very keen on this, but you are right - I have a couple of other things to work through first. Thanks heaps.

    US Phillips HDR112 TIVO, TurboNet, PAL Tuner, 80gb HDD. Work, Fun.

  5. #15
    Join Date
    Aug 2007
    Location
    Christchurch
    Posts
    51

    New Walkthrough for using ozTivo 1.6.2 Image in New Zealand:

    I decided to re-image and try again. A slightly simpler setup, but it works

    I have taken over 100 photos of every step along the way if someone wants to edit these into a nice tutorial. I'm afraid I can't - I have already waaay overstretched my free time for the forseeable future (at time of writing, I have already re-imaged and I am trying postcode 02120).

    Conclusion: ozTivo 1.6.2 is quite easy to use in NZ (it's much more user friendly now and has considerable provision for New Zealand) as long as you follow the walkthrough and don't do the following:
    - Don't use postcodes that are just for one city - ozTivo does not support them fully yet.
    - Don't hope to use both modem and LAN right away. Using both is hard right out of the box. However, catdog apparently has a solution (see a couple of posts up).
    - Don't use nic_config_tivo via terminal (serial) or telnet (LAN). For me, as soon as I do something in nic_config_tivo I can no longer use the modem successfully.
    - Don't boot up tivo with both LAN and serial plugged in - it will probably freeze at bootup screen.
    - Do double check connections and fresh batteries in the remote

    My (simpler) setup: NZ Free To Air, One Source, Modem connection.
    (as 'code' to retain formatting).

    Code:
    I started by Using ozTivo 1.6.2 2006-11-06 with installer v1.23 (not internet updated to 1.24)
    - I selected the disk and imaged it. Then,
    - Network -> Modem -> Add ISP details
    - Network -> Emulator -> NZ 210.48.107.133, port 8000
    - PalMod -> (option 4, then 1, then 3). Changes the horizontal resolution to 720.
      - Good for archiving to DVD.
      - you may see artifacts on the screen on some TIVOs (maxing out the MPEG2 chip). So can change back.
    - While in PalMod -> (3, 3, 2, 7, 5.) to select the NZ frequency table - the default is Aussie.
    - While in PalMod -> (3) then change RF Output to channel 60 (what my TV is tuned to).
    - While in PalMod -> Save and Exit.
    
    Then I installed the HDD and booted into Guided setup:
    First time round I made and error in GS which caused problems, but I redid GS as follows:
    Welcome to ozTivo - press select 
    ozTivo Service Terms - press select
    Program Source - Select "I have one source".
    Zip Code - Enter 02112 (for NZ FTA (Cable)), press select
    Time Zone - press "Pick me! Pick me!" 
    Daylight Savings - select "Pick me instead, I'm the choice you need to make". 
    Area Code - Enter 002 and press select 
    Phone Dialing Options - select "continue" and press select 
    Setup Call - Press select to go past this screen 
      It will take a while to connect and do it's thing. 
      Let it do its thing (go make a coffee or play quake for a bit) 
      When finished press select 
    Dial In Numbers - should already be configured, 
      so choose "done trying area codes" and press select 
    No local Numbers - choose "sales and marketing program" and press select 
    Set you FIRST Input - choose "I'm using an Antenna and a PAL Tuner" and press select
      - Also available: "I'm using a Set Top Box
    First Input Lineup - choose "Christchurch - Antenna, CH"
      - Other Cities available (due to using the NZ-wide PostCode)
    This Option Doesn't Work - choose "Christchurch" and press select
    Channels You Receive - keep the Add all channels and press the right arrow. 
      You can always add more or remove some later. 
    Guide Data Call - press select to let it do it's daily call for guide data. 
    Before you can record - read and press select.
    Congratulations! - read and press TIVO button.
    You're done with G/Setup. Leave it for a few hours (4-8 hours) and then reset.
    
    Results:
    - Time - Correct time (after restart)
    - Channels - all correct, though one missing. 42 = Something. Not sure, but Watermarked "Arirang" and "Korean Global TV"
    - A message with Serial PPP link: IP Address of 202.14.102.198
      - I tried connecting to it in IE7 (with http:// in front) but failed.
      - I probably need to do some kind of network config on the PC for that to work. 
    
    Other:
    - I tried GS again with the new 02120 postcode, but "No cable provider" error.
      - Apparently have to try that postcode with a fresh image.
    - I used nic_config_tivo and configured modem (with exactly the same settings I had before).
      - Now in first conection of GS, says "Failed. Service not answering".
      - I cannot see any changes to tclient.conf or oztivo.conf
    - I used nic_config_tivo and tried to configure emulator.
      - Failed with the following error message (clipped):
        /sbin/nic_config_tivo: line 2:   472 Illegal Instruction    $dialog --backtitle "$backtitle" --title     ...
      - I cannot see any changes to tclient.conf or oztivo.conf
    - I used nic_config_tivo and configured TurboNet.
      - Only changes are in oztivo.net: "nic=TurboNet" and "netmask="
    - I reset the TIVO with LAN connected. In GS mode.
      - Worked fine, until I tried to connect to tivo'sIP with ftp, http or telnet. Then tivo froze (remote control and background motion graphics all stop responding).
    Last edited by NoSignal; 16-08-2007 at 06:06 AM. Reason: spelling

    US Phillips HDR112 TIVO, TurboNet, PAL Tuner, 80gb HDD. Work, Fun.

  6. #16
    Join Date
    Aug 2007
    Location
    Christchurch
    Posts
    51
    So to reflect, my motivation on this thread was that the ozTivo image seems to have so many concessions for NZ now that it hardly seems necessary for people to go to the extra effort of making a NZ version. Wouldn't that extra effort be better put into helping with slight tweaks to the ozTivo image (maybe I'm just naive)? In addition, I'd always prefer to use an image that is 1 year younger, with quite a few new bug fixes, given a choice...

    US Phillips HDR112 TIVO, TurboNet, PAL Tuner, 80gb HDD. Work, Fun.

  7. #17
    Join Date
    May 2004
    Location
    Victoria
    Posts
    1,239
    Quote Originally Posted by NoSignal View Post
    As in freeze. I did choose "Failsafe" in nic_config_tivo which is "16" from memory, but the setting changes you say? Well, I've re-imaged and now I don't want to touch nic_config_tivo because that seems to make the modem fail permanently, regardless of later editing of the conf files or re-running nic_config_tivo

    So far, I have only used the ozTivo image.
    Well if you want to stop the freezing you *HAVE* to alter the timing setting. I can't see how manually editing the oztivo.conf file would upset your modem connection but if you are that afraid then you have no choice but to unplug the network cable to stop the freezing.
    Darren King
    OzTiVo Repairs and Modifications
    If your TiVo requires repairs or modifications
    then visit: http://kingey1971.wix.com/tivorepairs

    NOW ALSO REPAIRING FETCH TOO!

  8. #18
    Join Date
    Aug 2004
    Location
    The Mainland
    Posts
    542
    Quote Originally Posted by NoSignal View Post
    So to reflect, my motivation on this thread was that the ozTivo image seems to have so many concessions for NZ now that it hardly seems necessary for people to go to the extra effort of making a NZ version. Wouldn't that extra effort be better put into helping with slight tweaks to the ozTivo image (maybe I'm just naive)? In addition, I'd always prefer to use an image that is 1 year younger, with quite a few new bug fixes, given a choice...
    You're welcome to take it on.

    Testing documenting and confirming operation for users.
    1 x Philips TiVo Series 1, Cachecard, 1 x 1TB SATA (with recent TradeMe sourced adaptor), Mk II Pal Tuner Mod, NZ Emulator, Previously Dual A/V Source, Now Pay Satellite
    2 x TiVo HD, Freeview, HNP, 2TB (WD-AV) jmfs upgraded
    1 x Thomson UK TiVo, Cachecard, 200GB, Testing Work

  9. #19
    Join Date
    Aug 2007
    Location
    Christchurch
    Posts
    51
    I can now confirm postcodes 02112 and 02120 work on the ozTivo Image 1.6.2 for Christchurch FTA via a US tivo with PAL tuner. I took 100+ photos of every step along the way, and the text version of the walkthru is above, so I (or anyone else who asks me for the pics) could mix those two resources togeather . So I can't see any advantages to using the nzTivo image at the moment (other than maybe Freeview in the distant future).

    US Phillips HDR112 TIVO, TurboNet, PAL Tuner, 80gb HDD. Work, Fun.

  10. #20
    Join Date
    Apr 2004
    Location
    Perth, Western Australia
    Posts
    3,037
    I will be updating the OzTiVo image sometime this year.

    Please post any changes/additions you would like to make NZ installs easier to our wiki

    Thanks,

    Peter.
    Please search this forum and our Website for your TiVo questions before starting a new thread. Thanks!

Similar Threads

  1. Testing latest nztivo Dec06RC1 UK image
    By slangnz in forum New Zealand General Forum
    Replies: 5
    Last Post: 03-08-2008, 08:15 PM
  2. oztivo image
    By framtech in forum Software Upgrades/Mods
    Replies: 4
    Last Post: 20-07-2008, 09:19 PM
  3. I need the Old Oztivo Image
    By Videoguy in forum Question and Answer Forum
    Replies: 0
    Last Post: 16-01-2008, 08:13 AM
  4. Getting nzTivo Thomson Dec06 RC1 image & Turbonet Card working
    By fairyland in forum New Zealand General Forum
    Replies: 14
    Last Post: 24-05-2007, 10:56 AM
  5. oztivo image in USA
    By tappy in forum Question and Answer Forum
    Replies: 1
    Last Post: 17-11-2006, 07:49 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •