I've got a philips Tivo which works well for the most part. It was sold to me as having a 10/100mb turbonet card and this is what I set it up as when installing the nz tivo images to the hard drive. Copying files from the tivo using msf_ftp, the transfers run at about 1000kb/s or 1mb/s. These speeds suggest a 10mb card rather than a 10/100. Is this common, or are config changes required to get it working at full speed?

Secondly, the msf_ftp works fine for about 5minutes then stops. Not only does msf_ftp stop responding but the whole networking system on the Tivo dies. The tivo will not respond to pings, telnet, tivoweb etc etc. I have to reboot the system to get it all working again. I've experience the same problem using tytools, the copy begins then kills the networking on my Tivo. Any Ideas?