I've got a philips Tivo which works well for the most part. It was sold to me as having a 10/100mb turbonet card and this is what I set it up as when installing the nz tivo images to the hard drive. Copying files from the tivo using msf_ftp, the transfers run at about 1000kb/s or 1mb/s. These speeds suggest a 10mb card rather than a 10/100. Is this common, or are config changes required to get it working at full speed?
Secondly, the msf_ftp works fine for about 5minutes then stops. Not only does msf_ftp stop responding but the whole networking system on the Tivo dies. The tivo will not respond to pings, telnet, tivoweb etc etc. I have to reboot the system to get it all working again. I've experience the same problem using tytools, the copy begins then kills the networking on my Tivo. Any Ideas?
Bookmarks