Page 3 of 4 FirstFirst 1234 LastLast
Results 21 to 30 of 33

Thread: PVR10UK Hard Drive Upgrade and Cachecard

  1. #21
    Join Date
    Jul 2006
    Location
    Auckland
    Posts
    19
    Hey mate,

    i dont suppose there is a guide for this?
    1 step at a time is driving me nuts doing a little piece each night... hahah

    ive installed the mod, and rebooted the tivo and there is no change, so i suspect i need to re run uided setup? and redo the channels? or not?

    cheers.

    otherwise... msn: if you have the time: n10cte@hotmail.com
    TiVo Series one unit PVR10UK w/250Gb, 512Mb Cachecard, FTA

  2. #22
    Join Date
    May 2004
    Location
    Wellington, NZ
    Posts
    477
    Quote Originally Posted by n10ct
    i dont suppose there is a guide for this?
    1 step at a time is driving me nuts doing a little piece each night...
    What are you trying to achieve? What image are you running and what problem are you trying to solve? None if this should be required if you are using one of the standard images. The manual setup of ukchan.o is just required if you are using the standard UK image that comes on UK TiVo's.

    Quote Originally Posted by n10ct
    ive installed the mod, and rebooted the tivo and there is no change, so i suspect i need to re run uided setup? and redo the channels? or not?
    You can check the modules that are loaded using 'lsmod'. If there is no ukchan.o loaded and you are having trouble tuning to channels then you can use 'insmod ukchan.o' and then try changing channels again.

  3. #23
    Join Date
    Jul 2006
    Location
    Auckland
    Posts
    19
    I am using nztivo image from orac.caffeine.co.nz

    What i want is a tivo that will allow me to use live tv and thus record on channels other than TV3 which is all im able to get...

    everything else seems to run just beautifully.
    TiVo Series one unit PVR10UK w/250Gb, 512Mb Cachecard, FTA

  4. #24
    Join Date
    Jul 2006
    Location
    Auckland
    Posts
    19
    [TiVo [p0] ~]# lsmod
    turbonet2 10552 1
    mixaud 5872 1
    scartmux 2628 1
    ukchan-2.5.5 1336 0 (unused)
    pxmpegdecode 65260 0 [scartmux]
    therm 1164 0 (unused)
    fan 976 0
    ideturbo 4920 0 (unused)
    fpga7114 146156 5 [scartmux ukchan-2.5.5]
    i2c 10480 0 [scartmux ukchan-2.5.5 pxmpegdecode therm fpga7114]
    TiVo Series one unit PVR10UK w/250Gb, 512Mb Cachecard, FTA

  5. #25
    Join Date
    May 2004
    Location
    Wellington, NZ
    Posts
    477
    Quote Originally Posted by n10ct
    [TiVo [p0] ~]# lsmod
    turbonet2 10552 1
    mixaud 5872 1
    scartmux 2628 1
    ukchan-2.5.5 1336 0 (unused)
    pxmpegdecode 65260 0 [scartmux]
    therm 1164 0 (unused)
    fan 976 0
    ideturbo 4920 0 (unused)
    fpga7114 146156 5 [scartmux ukchan-2.5.5]
    i2c 10480 0 [scartmux ukchan-2.5.5 pxmpegdecode therm fpga7114]
    Okay. It looks like you are running the US v3.0 software, and not the UK v2.5.5 software. The ukchan-2.5.5.o module will probably not work with this software... in fact I am surprised it even loads?

    You probably just want the ukchan.o module that came with the image? I don't know much about getting the US (v3.0) software working on the UK hardware.

  6. #26
    Join Date
    Jul 2006
    Location
    Auckland
    Posts
    19
    okay now im confused...

    i used the nztivo image from ftp.orac.caffeine.co.nz

    it is version 2.5.5-01010023

    this info is verified in the System Info page on the tivo.

    im not sure why you think its the us 3?

    im happy to start from scratch if you have a better image/process that i can follow, if you dont think this image is right...

    ... and it was all looking so good. haha
    thanks for your time, it is appreciated.
    TiVo Series one unit PVR10UK w/250Gb, 512Mb Cachecard, FTA

  7. #27
    Join Date
    May 2004
    Location
    Wellington, NZ
    Posts
    477
    Quote Originally Posted by n10ct
    i used the nztivo image from ftp.orac.caffeine.co.nz
    it is version 2.5.5-01010023
    Sorry, my mistake, I got things mixed up when comparing the listings against mine. I have an ax88976 network driver rather than a turbonet2. The scartmux definitely means it's a 2.5.5 install.

    Considering its a 2.5.5 install, there should not be any problems with the tuner when running the ukchan module. I have attached a module I created a couple of years ago which should work and correctly configure NICAM support. If you have the rmmod command you could do the following to load it:

    # rmmod ukchan-2.5.5
    # insmod ukchan-2.5.5_nz-nicam.o
    Attached Files Attached Files

  8. #28
    Join Date
    Jul 2006
    Location
    Auckland
    Posts
    19
    can you attach rmmod for me? i cant find that anywhere... as a file.
    TiVo Series one unit PVR10UK w/250Gb, 512Mb Cachecard, FTA

  9. #29
    Join Date
    May 2004
    Location
    Wellington, NZ
    Posts
    477
    Quote Originally Posted by n10ct
    can you attach rmmod for me? i cant find that anywhere... as a file.
    It's actually the same binary as insmod. So you just need to create a sumbolic link:

    # rw
    # cd /sbin
    # ln -s insmod rmmod

  10. #30
    Join Date
    Jul 2006
    Location
    Auckland
    Posts
    19
    okay...

    that gives me :

    [TiVo [p0] ~]# lsmod
    turbonet2 10552 1
    mixaud 5872 1
    scartmux 2628 1
    ukchan-2.5.5 1336 0 (unused)
    pxmpegdecode 65260 0 [scartmux]
    therm 1164 0 (unused)
    fan 976 0
    ideturbo 4920 0 (unused)
    fpga7114 146156 5 [scartmux ukchan-2.5.5]
    i2c 10480 0 [scartmux ukchan-2.5.5 pxmpegdecode therm fpga7114]


    i still see ukchan-2.5.5 up there and the rmmod instigated a tivo reboot also... is that correct?

    still i get only tv2 show up in live tv, do i need to rerun the guided setup?
    or is there and easy way of doing this... somehow..
    TiVo Series one unit PVR10UK w/250Gb, 512Mb Cachecard, FTA

Similar Threads

  1. Series 3 Australian/NZ TiVo Hard Disk Upgrade
    By rtfmoz in forum Hardware Upgrades/Mods
    Replies: 10
    Last Post: 27-11-2017, 07:14 PM
  2. Hard drive upgrade worked, almost!
    By micknews in forum Australian TiVoHD
    Replies: 3
    Last Post: 14-07-2010, 10:42 PM
  3. Add 2nd Hard Drive
    By theshermans in forum Hardware Upgrades/Mods
    Replies: 1
    Last Post: 20-01-2008, 10:34 PM
  4. Hard Drive backup/upgrade
    By jamesthecarman in forum Question and Answer Forum
    Replies: 10
    Last Post: 18-04-2007, 08:08 PM
  5. TurboNET to CacheCARD upgrade FAQ
    By AlaskaDude in forum Question and Answer Forum
    Replies: 1
    Last Post: 30-04-2006, 01:29 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •