-
Upgrade to v1.6.2 issue
Hi,
I have been a 'silent' TiVo user for years and our family loves it. Dutifully following instructions to upgrade the url for the Emulator, I decided to bite the bullet and upgrade from an old 1.3 image to the latest Philips 1.6.2 image. All went fine until I had to select the IR code. Selecting the Strong slow 30099 code locked the system. The hand controller would operate, but the TiVo refused to respond. I rebuilt the HD image a number of times, changed the hard disk to another, and each time it would lock up at the same place. I still don't have a resolution, but any help appreciated. Please call on 02 9453 5699 and I'll call you back! It's school holidays and I'll get crucified :-)
Also, I downloaded a new image and burned a new CD to remove the question of a compromised burn, so as I have eliminated everything that I can, I'm hoping that someone can come up with a solution.
Many thanks
Part of a log...
Jun 30 08:01:28 (none) kernel: Finish up entered...
Jun 30 08:01:28 (none) kernel: SetAllActiveBits returned <0>
Jun 30 08:02:16 (none) kernel: mediaswitch: Encoder in IBP-Frame mode
Jun 30 08:02:16 (none) kernel: mediaswitch: returning -1 from standin tune after tuning to ch -1 with adjust 0
Jun 30 08:02:16 (none) kernel: tuning:lock 1
Jun 30 08:02:17 (none) kernel: tuning:lock 0
Jun 30 08:02:17 (none) kernel: mediaswitch: Encoder in IBP-Frame mode
Jun 30 08:02:17 (none) kernel: mediaswitch: returning -1 from standin tune after tuning to ch -1 with adjust 0
Jun 30 08:02:17 (none) kernel: tuning:lock 1
Jun 30 08:02:18 (none) kernel: tuning:lock 0
Jun 30 08:02:28 (none) kernel: mediaswitch: Encoder in IBP-Frame mode
Jun 30 08:02:28 (none) kernel: mediaswitch: returning -1 from standin tune after tuning to ch -1 with adjust 0
Jun 30 08:02:28 (none) kernel: tuning:lock 1
Jun 30 08:02:29 (none) kernel: mediaswitch: Encoder in IBP-Frame mode
Jun 30 08:02:29 (none) kernel: mediaswitch: returning -1 from standin tune after tuning to ch -1 with adjust 0
Jun 30 08:02:35 (none) kernel: mediaswitch: Encoder in IBP-Frame mode
Jun 30 08:02:35 (none) kernel: mediaswitch: returning 0 from standin tune after tuning to ch -1 with adjust 0
Jun 30 08:02:35 (none) kernel: mediaswitch: Encoder in IBP-Frame mode
Jun 30 08:02:35 (none) kernel: mediaswitch: returning 0 from standin tune after tuning to ch -1 with adjust 0
Jun 30 08:02:35 (none) kernel: mediaswitch: Encoder in IBP-Frame mode
Jun 30 08:02:35 (none) kernel: mediaswitch: returning 0 from standin tune after tuning to ch -1 with adjust 0
Jun 30 08:02:41 (none) kernel: mediaswitch: Encoder in IBP-Frame mode
Jun 30 08:02:41 (none) kernel: mediaswitch: returning 0 from standin tune after tuning to ch -1 with adjust 0
Jun 30 08:03:54 (none) kernel: Tivoformat Carrier Frequency not set.
It just locks at this point.
-
There appears to be a problem with that code, use another one.
Peter.
-
Thanks for the reply Peter. I have been using that code on image 1.3 for about 2 years without a problem. I have also tried all the other codes. FYI, once the TiVo remote stops responding, I can still drive the TiVo through the web remote. I have a working machine now, EXCEPT that the remote won't change the channel. All other functions OK
regards
Pete
-
Unfortunately that code has become corrupted.
Others who have had the same problem report that one of the other codes work ok.
Which box are you using? I can try and ask others for the code.
Peter.
-
Srt5066....
You don't think that it is a problem with the IR transmitter..?
-
no, I'll ask on the mailing list for you.
Peter.
-
I think I have fixed the codes.
Run GS using 30129, 30099 should not be there now.
Peter
-
Thanks Peter,
I'll run through GS again this morning.
It works... it works...
Thanks for all your help
regards
Pete
-
Good, it has been on my todo list for a while, but I didn't give it priority as others had reported that one of the other strong codes worked for them.
Peter.