Printable View
I'd like to fix the startup animation, but I don't have a network card. This means that I cannot follow the following step:
Is there any other way to figure out the line number? If not, can I simply use 1507 or could that cause problems if the number doesn't match? (I'm using the 1.62 image.)Quote:
3. Enter the following address into a browser, where the x's are your TiVo's IP: xxx.xxx.xxx.xxx/mfs/Resource/VideoClip
I've done the startup animation at least a dozen times on different machines (Sony, Philips and even a UK Thompson running the latest OzTiVo image) and it has always been 1507.
Of course I take no responsibility if it isn't for you, but you will have to be pretty damn unlucky!
Thanks Darren. I'll give it a try.Quote:
I've done the startup animation at least a dozen times on different machines [...] and it has always been 1507.
I have already answered your question the first time you posted it in the announce thread
I agree with Darren and as I said then, "You could probably do it with dumpobj, but realistically if you are running an NZTiVo or ZATiVo or OzTivo image the number will be 1507 based on the hundreds that have already installed it."
Peter.
I have just checked both my TiVos and they have 1593 and are running NzTiVo Ver 1.5Quote:
Originally Posted by petestrash
Are those Thomson units running uk software ?
Peter
Both are Sony and running NZ TiVo Ver 1.5 (Sony)
That is the first I have heard, have you done the update?
What numbers do you get next to LongOpen.mpv when you open xxx.xxx.xxx.xxx/mfs/Resource/VideoClip ?
Or better still could you please post the whole screen.
Peter.
I did the update on one TiVo using 1593 and it worked with no problems.
Could you please post the whole screen from xxx.xxx.xxx.xxx/mfs/Resource/VideoClip.
Peter.
Resource/VideoClip =
NoSignal.mpv:1631:1632:4096 tyDb 1631 22/02/05 12:19 180
S_FindByName0.mpv:1608:1609:4096 tyDb 1608 22/02/05 12:19 192
S_LongOpen.mpv:1592:1593:14336 tyDb 1592 22/02/05 12:19 188
S_Programs0.mpv:1613:1614:4096 tyDb 1613 22/02/05 12:19 184
S_ProgramsWriteOn.mpv:1611:1612:1024 tyDb 1611 22/02/05 12:19 200
S_Setup0.mpv:1618:1619:4096 tyDb 1618 22/02/05 12:19 184
S_SetupWriteOn.mpv:1616:1617:1024 tyDb 1616 22/02/05 12:19 192
S_Showcases0.mpv:1623:1624:4096 tyDb 1623 22/02/05 12:19 192
S_ShowcasesWriteOn.mpv:1621:1622:1024 tyDb 1621 22/02/05 12:19 200
S_Showing0.mpv:1605:1606:4096 tyDb 1605 22/02/05 12:19 184
S_ShowingWriteOn.mpv:1603:1604:1024 tyDb 1603 22/02/05 12:19 200
S_Suggests0.mpv:1628:1629:4096 tyDb 1628 22/02/05 12:19 184
S_SuggestsWriteOn.mpv:1626:1627:1024 tyDb 1626 22/02/05 12:19 200
S_TiVoCentral0.mpv:1594:1595:4096 tyDb 1594 22/02/05 12:19 192
S_TiVoCentralWriteOn.mpv:1590:1591:1024 tyDb 1590 22/02/05 12:19 208
After click on S_longopen above =
VideoClip 1592/10 {
Version = 2
ServerVersion = 64
Name = S_LongOpen.mpv
File = 1593
ServerId = 1190172
IndexPath = /Resource/VideoClip/S_LongOpen.mpv:1592:1593:14336 /Recording/DiskUsed/11/1592:14336 /Server/1190172
Ok, so are you using the SONY image?
Peter.
Yes the Sony image
Ok, that solves the mystery.
As it says, the instructions are only for Philips based images. And all of these will have 1507 as the file number.
Using this video clip on Sony images leaves a jump at the end changing between the Philips and Sony animated backdrops.
You might prefer this to the sound drop out though.
Peter.
I thought I must have missed the obvious somewhere.:o
Sorry to have caused a flurry.
No problems, but I was very curious to find out why you were different.
The patch file has been downloaded over 1000 times.
I have asked people to email me if they encounter a different number as you could hose your TiVo if you enter the wrong number.
I have only received a few queries re different numbers (mostly 1506) and these turned out to be people not following the instructions properly. At least 2 have hosed their system by using 1506.
All cool.
Peter.