Since this forum is about TivoWebPlus testing, I thought I'd drop a photo showing testing in Shanghai. :p
Peter
Printable View
Since this forum is about TivoWebPlus testing, I thought I'd drop a photo showing testing in Shanghai. :p
Peter
Thank you very much for the reply. Info module shows two different types of version: "Software System" and "Kernel Information Version ". Please see copy/paste of the info below. The thing is that WebRemote worked fine with TivoWebPlus 1.21. But I like OzTivoWebPlus much more.
Thank you.
============================
TiVo Box Information
Software System: 4.0.1b.2003.12.02-1731-01-2-240
Service Number: 2400000E074CC03
System Type: United States Series 2 Stand-Alone
Tuner Count: 1
Remote Address 0
Uptime 6d 3h 04m 32s
Current Temperature: 42C / 107.6F
Network Information
TiVo Address: 192.168.101.5
Remote Client Address: 192.168.101.101
HTTP Host Address: tivo
TivoWebPlus Distribution
Version 1.3.0 (oztivo-060821)
(include output from distribution check)
Kernel Information
Version 2.4.18
Compile #38 Thu Oct 23 10:48:29 PDT 2003
And this is my "TivoWebPlus Distribution" version.
===================================
TivoWebPlus Distribution
Version 1.3.0 (oztivo-060821)
./tivoweb.cfg differs from the distribution
./bin_ppc/find was not included in the distribution
./bin_ppc/SendKey was not included in the distribution
./images/backdoorbutton.png was not included in the distribution
./images/altbootbutton.png was not included in the distribution
./images/brownbutton.png was not included in the distribution
./images/bootbutton.png was not included in the distribution
./images/conflictbootbutton.png was not included in the distribution
./images/bufferbutton.png was not included in the distribution
./images/greenbutton.png was not included in the distribution
./images/killbutton.png was not included in the distribution
./images/nobootbutton.png was not included in the distribution
./images/rebootbutton.png was not included in the distribution
./images/xPluszbutton.png was not included in the distribution
./images/redbutton.png was not included in the distribution
./modules/hackman.ini was not included in the distribution
./modules/hackman.cfg was not included in the distribution
./modules/higuide.cfg differs from the distribution
./modules/bufferhack.itcl was not included in the distribution
./modules/hackman.ini.last was not included in the distribution
./modules/displaytext.itcl was not included in the distribution
./modules/folders.itcl was not included in the distribution
./modules/hackman.itcl was not included in the distribution
./modules/livetv.itcl was not included in the distribution
./modules/xPlusz.itcl was not included in the distribution
./modules/xboxtv6.itcl was not included in the distribution
./modules/displaytext.readme was not included in the distribution
./modules/hackman_bak.cfg was not included in the distribution
./modules/hackman_bak.ini was not included in the distribution
./bin_mips/sendkey was not included in the distribution
./bin_mips/find was not included in the distribution
./backups/channelprefs_save was not included in the distribution
./backups/settings was not included in the distribution
./reorder.js was not included in the distribution
./stderr was not included in the distribution
I don't know of any version of TW or TWP whose Web Remote module will work on Series 2 software. The problem is that there is no event handler or "sendkey" facility on this software. I know some people are looking into using routerplus to hopefully solve the problem.
Without an event hander or sendkey facility it's not going to be possible to get the Web Remote or Phone modules working on the Series 2 software.
I've got it working ! :)
1.
I made some changes to the webremote.itcl module.
I replaced version checking code (at the end of the file) :
if {$::version <= 5} {
register_module "sendkey" "Web Remote" "A Web-based Remote Control for your TiVo"
}
2.
created "devbin" directory in the Tivo root. And placed "sendkey" file in there. Made sure that it is executable : chmod 755 sendkey
3.
Reload TWP.
It works great ! Thanks again for the help.
I attached "webremote.itcl" and "sendkey" file in case somebody would need them.
Mark.
I've just tried your suggestions on a TiVo also running 4.01b.
While it does actually control the TiVo, if you browse any menu below the TiVo Central menu it drops back to live TV very quickly.
But for skipping ad's it's fine.
Do you also have this behaviour?
Peter.
Just started using TWP. Not sure if it's is a good thread to post this but... i built a new theme/stylesheet last night which is available here:
http://www.studioahoy.com/clients/twp/fairyland.css
It may not function appropriately for advanced users, but it's tested in Safari 2.0.4...!
(Drop in /var/hack/TivoWebPlus/Themes/ and full restart TivoWebPlus or reboot Tivo.)
While changes/fixes are still being applied to TivoWebPlus v1.3.1 the majority of development is directed at a much changed v2.1.0. It includes things such as pulldown menus (there is even a menu editor to make it easy to customise menus).
It would be much appreciated if people could play with the new version while there is momentum to update/fix it. There are three main people now working on the v2.1.0 distribution - BTUx9 (who has turned the whole thing into dynamically loaded modules to make it perform well on the DirecTV units), SteveT (who has been revamping the User Interface with CSS and customisable pull down menus) and myself (general bug fixes and feature requests). Once the momentum dies down it will take longer to get fixes implemented and tested on all the different hardware. We currently have 60+ people downloading and testing the latest releases, but the majority of these are in the US and hence are not running Series 1 v3.0/2.5.5 hardware.
The distribution can be found on the website. The best place to post feedback/requests is the v2.1 support forum