correct, do not reboot at all.
once you have killed it enter the line:
/hack/bin/emuProxyZA -ds /var/log/ -dc /var/log/ -d2 > /var/log/emuProxyZA.log 2>&1 &
Then do a daily call.
Try not to reboot till someone here tells you to.
Peter.
Printable View
correct, do not reboot at all.
once you have killed it enter the line:
/hack/bin/emuProxyZA -ds /var/log/ -dc /var/log/ -d2 > /var/log/emuProxyZA.log 2>&1 &
Then do a daily call.
Try not to reboot till someone here tells you to.
Peter.
Good evening.
Followed Peters instructions and added the emuProxy log line after killing the emuProxy line.'
[TiVo [p0] ~]# [TiVo [p0] ~]# ps ax
PID TTY STAT TIME COMMAND
1 ? SW 0:00 init
2 ? SW 0:00 (kflushd)
3 ? SW 0:01 (kswapd)
49 ? SW 0:00 /sbin/shondss.sh
51 S3 SW 0:00 /bin/bash --login
61 ? S 0:00 update (bdflush)
72 ? S 0:00 syslogd -p /var/dev/log -m 10000
74 ? SW 0:00 klogd
75 ? SW 0:00 bash /sbin/tnlited.sh
^@ 77 ? SW 0:00 /sbin/tnlited 23 /bin/bash -login
85 ? SW 0:00 /tvbin/switcherstart -m -F
86 ? S 0:02 /tvbin/mfsd
87 ? S 0:00 fancontrol
115 ? SW 0:00 /tvbin/mcp
121 ? SW 0:00 PipeListen
122 ? S 0:00 Mcp event
123 ? SW 0:00 /tvbin/tcphonehome
135 ? SW 0:00 tivoftpd
136 ? S 0:00 cron
144 ? SW 0:00 FsMpStream
145 ? SW 0:00 PipeListener
^@ 149 ? S 0:00 PhoneHome event hd
151 ? R 0:11 tivosh /hack/TivoWebPlus/httpd-tt.tcl
153 ? S 0:00 /var/hack/autospace/osdcons
156 ? S 0:00 /tvbin/dbgc-mcp
158 ? R 0:00 tivosh /var/hack/autospace/autospace.tcl BG
162 ? S 0:00 /hack/bin/emuProxyZA -s minnie.tuhs.org -p 80
164 ? S 0:00 trickey
182 ? SW 0:00 PipeListener
183 ? R 0:02 /tvbin/myworld
184 ? SW 0:00 FsMpStream
185 ? SW 0:00 PipeListener
^@ 186 ? SW 0:00 TmkSinkMixAud
189 ? SW 0:00 TmkClipCache0
190 ? S 0:00 TmkClipCache1
191 ? R 0:02 TvMomCs22Sink
192 ? SW 0:00 TvMomCs22Sink
196 ? R 0:00 Mediaswitch0
197 ? S 0:00 TvVideoManager
198 ? R 0:00 TvRecorder
199 ? S 0:00 TmkTaskManager
200 ? S 0:03 Scheduler
201 ? S 0:03 Prioritizer
202 ? S 0:00 EventLog event
203 ? S 0:00 PvrMain
^@ 204 ? SW 0:00 bus handler
^@ 205 ? S 0:02 ContextMgr eve
207 p0 SW 0:00 /bin/bash -login
209 p0 RW 0:00 ps ax
[TiVo [p0] ~]#
[TiVo [p0] ~]# kill 162
[TiVo [p0] ~]#
[TiVo [p0] ~]# /hack/bin/emuProxyZA -ds /var/log/ -dc /var/log/ -d2 > /var/log/emuProxyZA.log 2>&1 &
[1] 210
[TiVo [p0] ~]#
[TiVo [p0] ~]#
Then ran a daily call, but it stayed on "connecting"for two hours, so I rebooted and tried again with the same result.
The ps ax | grep emu command suggested by TivoZA gave:
[TiVo [p1] ~]# ps ax | grep emu
210 ? S 0:00 /hack/bin/emuProxyZA -ds /var/log/ -dc /var/log/ -d2
[TiVo [p1] ~]#
[TiVo [p1] ~]#
The complete emuProxy log line does not appear.
Have tried all of this several times
Where now?
Regards
Donaldovitch
Try running emuProxyZA as you did but instead of outputting the debug content to a file, output the content to your putty terminal. This is done by dropping everything after the "-d2" in the above line, i.e. type the following:
Code:/hack/bin/emuProxyZA -ds /var/log/ -dc /var/log/ -d2
Good morning!
Opened ps ax, then Killed emuProxy file 62, pasted the shortened line and entered.
Results from putty:
[TiVo [p0] ~]# ps ax
PID TTY STAT TIME COMMAND
1 ? SW 0:00 init
2 ? SW 0:00 (kflushd)
3 ? SW 0:00 (kswapd)
49 ? SW 0:00 /sbin/shondss.sh
51 S3 SW 0:00 /bin/bash --login
61 ? S 0:00 update (bdflush)
72 ? S 0:00 syslogd -p /var/dev/log -m 10000
74 ? SW 0:00 klogd
75 ? SW 0:00 bash /sbin/tnlited.sh
77 ? SW 0:00 /sbin/tnlited 23 /bin/bash -login
85 ? SW 0:01 /tvbin/switcherstart -m -F
86 ? S 0:03 /tvbin/mfsd
87 ? S 0:00 fancontrol
115 ? SW 0:00 /tvbin/mcp
120 ? SW 0:00 PipeListen
121 ? S 0:00 Mcp event
122 ? SW 0:00 /tvbin/tcphonehome
135 ? SW 0:00 tivoftpd
136 ? S 0:00 cron
141 ? SW 0:00 FsMpStream
142 ? SW 0:00 PipeListener
145 ? S 0:00 PhoneHome event hd
153 ? R 0:11 tivosh /hack/TivoWebPlus/httpd-tt.tcl
155 ? S 0:00 /var/hack/autospace/osdcons
156 ? S 0:55 /tvbin/dbgc-mcp
158 ? R 0:00 tivosh /var/hack/autospace/autospace.tcl BG
162 ? S 0:00 /hack/bin/emuProxyZA -s minnie.tuhs.org -p 80
164 ? S 0:00 trickey
182 ? SW 0:00 PipeListener
183 ? S 0:02 /tvbin/myworld
184 ? SW 0:00 FsMpStream
185 ? SW 0:00 PipeListener
186 ? SW 0:00 TmkSinkMixAud
189 ? SW 0:00 TmkClipCache0
190 ? S 0:00 TmkClipCache1
191 ? R 0:00 TvMomCs22Sink
192 ? SW 0:00 TvMomCs22Sink
193 ? R 0:00 Mediaswitch0
194 ? R 0:00 TvVideoManager
195 ? R 0:00 TvRecorder
196 ? S 0:00 TmkTaskManager
197 ? S 0:04 Scheduler
198 ? S 0:02 Prioritizer
199 ? S 0:00 EventLog event
203 ? R 0:00 PvrMain
204 ? SW 0:00 bus handler
205 ? S 0:01 ContextMgr eve
212 p0 SW 0:00 /bin/bash -login
214 p0 RW 0:00 ps ax
[TiVo [p0] ~]#
[TiVo [p0] ~]# kill 162
[TiVo [p0] ~]#
[TiVo [p0] ~]# /hack/bin/emuProxyZA -ds /var/log/ -dc /var/log/ -d2
emuProxyZA (version 4.1.40)
Guide server listener created
Time offset listener created
Accepted connection on port: 80
Date/Time: Tue Apr 3 12:06:19 2007
timeWeekdayOverride: 0, Difference: 1175601979
Server socket created
DNS address detected (proxy.hotkey.net.au), attempting to resolve to an IP address
Failed to find server IP for given DNS!
: Resource temporarily unavailable
Function getIPAddress returned an empty IP address with value 0.0.0.0
Regards
Donaldovitch
You need to edit the '/etc/resolv.conf' file and set the nameserver to the IP address of your router or the IP address of your ISP's DNS address. The edited file should look as follows (replace '192.168.1.1' with your router IP or ISP's DNS address):
Once done, you need to restart emuProxyZA or reboot the TiVo after which you can try debugging the call-in again.Code:# Example resolv.conf file
nameserver 192.168.1.1
# nameserver 192.168.14.1
# nameserver 192.168.14.2
OK
Have got IP of my ISP (202.138.0.10) and of my modem (192.168.1.1)
However I canot figure out how to edit the IP
.................................................. ...........................
[TiVo [p0] ~]# cd /etc/
[TiVo [p0] /etc]#
[TiVo [p0] /etc]# dir
boot.expect nsswitch.conf rc.net.orig
build-version oztivo.conf resolv.conf
chap-secrets oztivo_version resolv.conf.backup
chat-script palmod.conf services
dflt_sysinit.conf pap-secrets syslog.conf
dhclient-script postcodezones tclient.conf
dhclient.conf ppp-options tclient.conf-oztivo
fstab ppp-options.cua3 tclient.conf.orig
fstab.hda4 ppp-options.orig tclientUK.conf
fstab.hda7 profile termcap
hosts protocols termcap.orig
inittab psdevtab tivoconfig
mtab rc.d update_exclude
[TiVo [p0] /etc]#
[TiVo [p0] /etc]# more resolv.conf
search
nameserver 192.168.1.254
resolv.conf lines 1-2/2 (END)
.................................................. ................................
This is simply due to my lack of understanding.
Should I bone up on linux before proceeding?
If so could you point me to a good tutorial?
Unfortunately I have been unable to find anyone fluent in linux in this area (South coast of NSW)
Really appreciate your forbearance and patience.
Regards
Donaldovitch
Hi Don.
OK here's a little secret: You really don't need to know anything about linux to do what is requested of you. You have said that you can handle DOS without too much hassle and to be honest if you approach what you are doing pretty much the same as editing a config.sys or autoexec.bat file then you are almost home free. There's only a few little differences, namely:
use ls to list a directory
use cd to change directory
use ro to make the file system read only
use rw to make the file system read/write
use nano [filename] to text edit a file
use reboot to reboot the TiVo
That's about all you need to get you out of trouble with most basic things in addition to some of the commands given by Peter and TiVoZA in above posts.
The only gotcha you must remember is to issue a rw before starting otherwise no changes will be made, and after finishing issue a ro to put the file system back to read only.
So in your case this time do the following:
rw
cd /etc
nano resolv.conf
<do your editing and then save>
ro
Thank you Darren and al who are helping with ths problem.I will persist!
however will have to desist for a few days, as
1. we are having power outages (some planned) when I am able to work on the computer.
2. I am of to Melbourne to see my Daughter perform in the Comedy Festival over Easter.
Will be back on as soon as possible.
Regards
Donaldovitch
Good morning
I am back home and have worked out how to edit the IP address in resolv.conf
Changed it to my ISP's primary DNDS IP taken from their website
DNS IP Address:
Primary 202.138.0.10 (wallace.hotkey.net.au)
Secondary 202.138.0.11 (gromit.hotkey.net.au)
Killed emuProxy and ran trace
Results:
[TiVo [p0] ~]# ps ax
PID TTY STAT TIME COMMAND
1 ? SW 0:00 init
2 ? SW 0:00 (kflushd)
3 ? SW 0:00 (kswapd)
49 ? SW 0:00 /sbin/shondss.sh
51 S3 SW 0:00 /bin/bash --login
61 ? S 0:00 update (bdflush)
72 ? S 0:00 syslogd -p /var/dev/log -m 10000
74 ? SW 0:00 klogd
75 ? SW 0:00 bash /sbin/tnlited.sh
77 ? SW 0:00 /sbin/tnlited 23 /bin/bash -login
85 ? SW 0:00 /tvbin/switcherstart -m -F
86 ? S 0:02 /tvbin/mfsd
87 ? S 0:00 fancontrol
115 ? SW 0:00 /tvbin/mcp
121 ? SW 0:00 PipeListen
122 ? S 0:00 Mcp event
123 ? SW 0:00 /tvbin/tcphonehome
135 ? SW 0:00 tivoftpd
136 ? S 0:00 cron
143 ? SW 0:00 FsMpStream
144 ? SW 0:00 PipeListener
145 ? S 0:00 PhoneHome event hd
157 ? S 0:00 /var/hack/autospace/osdcons
159 ? S 0:00 /tvbin/dbgc-mcp
160 ? R 0:09 tivosh /hack/TivoWebPlus/httpd-tt.tcl
162 ? R 0:00 tivosh /var/hack/autospace/autospace.tcl BG
166 ? S 0:00 /hack/bin/emuProxyZA -s minnie.tuhs.org -p 80
168 ? S 0:00 trickey
186 ? SW 0:00 PipeListener
192 ? S 0:02 /tvbin/myworld
193 ? SW 0:00 FsMpStream
194 ? SW 0:00 PipeListener
196 ? SW 0:00 TmkSinkMixAud
197 ? SW 0:00 TmkClipCache0
198 ? S 0:00 TmkClipCache1
199 ? R 0:12 TvMomCs22Sink
200 ? SW 0:00 TvMomCs22Sink
201 ? R 0:00 Mediaswitch0
202 ? R 0:00 TvVideoManager
203 ? R 0:00 TvRecorder
204 ? S 0:00 TmkTaskManager
205 ? S 0:04 Scheduler
206 ? S 0:02 Prioritizer
207 ? S 0:00 EventLog event
208 ? R 0:01 PvrMain
209 ? SW 0:00 bus handler
210 ? R 0:01 ContextMgr eve
211 p0 SW 0:00 /bin/bash -login
213 p0 RW 0:00 ps ax
[TiVo [p0] ~]#
[TiVo [p0] ~]# kill 166
[TiVo [p0] ~]#
[TiVo [p0] ~]# /hack/bin/emuProxyZA -ds /var/log/ -dc /var/log/ -d2
emuProxyZA (version 4.1.40)
Guide server listener created
Time offset listener created
Accepted connection on port: 80
Date/Time: Fri Apr 13 10:50:58 2007
timeWeekdayOverride: 0, Difference: 1176461458
Server socket created
DNS address detected (proxy.hotkey.net.au), attempting to resolve to an IP address
Function getIPAddress returned a valid IP address
Could not connect to server: Connection timed out
[TiVo [p0] ~]#
[TiVo [p0] ~]#
Many Thanks
Donaldovitch
Hi
Just noticed that my ISP's port is listed as 8080, not 80 as advised by phone.
May be un important, but passed on anyway.
Donaldovitch