Can I switch from emulator port 80 to 8000 without losing shows?

It seems you need to redo GS, set pal guided setup mode using TWP then select redo guided setup from the on screen menus.

Peter.

Hi again,

I am now stuck with a message reading "Failed. No dial-in number chosen." when the Guided Setup starts the connecting process.

I am using v1.6.2 of OzTiVo.

Any ideas?

I am not using dialup at all...I am using CacheCard with ethernet to a router and broadband.

Bruce

What postcode are you using ?

Peter.

PostCode 02113 - although I just tried 02116 as well.
Area Code is 002

Bruce

Ok, next we will check that you are trying the NZ emulator and not the Oz one.

List the contents of your /etc/oztivo.conf file.

Peter

Contents is:

# OzTiVo menu configuration settings file
# Please do not edit this file
# Run the nic_config_tivo tool to reconfigure
nic=Cachecard
ip=192.168.1.15
mac=00:0B:AD:69:C6:67
timing=3
hostname=oztivo
emulator=minnie.tuhs.org
emulatorport=80
netmask=255.255.255.0
gateway=192.168.1.1
ssid=
wep=
wepkey=

But when I run nic_config_tivo and try and change Emulator it gives me the following meaage:

/sbin/nic_config_tivo: line 2: 360 Illegal Instruction $dialog --backtitle "$backtitle" --title "Select emulator" --menu "[Up][Down] to move\n[Enter] to select" 10 60 0 "minnie.tuhs.org" "Use minnie.tuhs.org, the Australian emulator" "210.48.107.133" "Use 210.48.107.133 (orac), the New Zealand emulator" "hydra.demon.nl" "Use hydra.demon.nl, The Netherlands emulator" "other" "Enter emulator IP/address manually" 2>/tmp/emulator.$$


Is it anything to do with me using Terminal program from Macintosh to Telnet into TiVo? - I only ask because a few weird things happen when trying to use that tool.

Is there any config file I can change manually via Telnet to put NZ details in? - I Did change the tclient.conf (like we used to have to do) - but I guess it doesn't use that file anymore?

Bruce

Quote:

---

Originally Posted by BruceC

Is it anything to do with me using Terminal program from Macintosh to Telnet into TiVo? - I only ask because a few weird things happen when trying to use that tool.
Bruce

---

try

telnet TIVOADDRESS 23

instead of

telnet TIVOADDRESS

Specifying the port turn off the fancy telnet negotiation which can cause problems on the tivo.
For example plain telnet from a linux box usually doesn't work unless you do the above.

I agree with wibble.

Peter.