-
Dreambox IR codes
I have been trying to get a TiVo to control a Dreambox model DM500S via IR blaster. I think someone else has such a box but I can't find any posts about it.
During GS I selected OzTiVo Dreambox for the IR code set but now comparing CableBoxCodeNum 30114 with the list here http://minnie.tuhs.org/tivo-bin/irdatabase.cgi it is listed as a Hills HSM075.
Looking in MFS using TivoWeb at "Component/Ir/TivoFormat/30114 the codes don't look the same as here http://minnie.tuhs.org/tivo-bin/irda...rowse&id=30114
I captured the codes with irSliceCreator, and with a digital scope determined the carrier frequency to be about 38kHz. The captured codes don't seem to work either.
Can anyone with a DM500S shed some light on this?
-
30114 was created by a New Zealander for the Hills Freeview box. I uploaded it to the OzTiVo slice.
We did have Dreambox at some stage though check mfs/Component/Type/2/, just don't know how it disappeared
Peter.
-
Retrieved old codes
I've retrieved the Dreambox IR codes from our other TiVo I set up ages ago. They work fine on a friend's DM500S but mine is a bit intermittent. I've uploaded them to the IR database but didn't specify a model number so there is no link for people to download them. Won't be a problem once they are included in the database proper.
-
Do you know which model the codes do work with these codes, and i'll add them so the codes can be seen.
I'm going to build a new IR slice soon also.
Peter
-
I can only confirm they work with Dreambox model DM500-S. They are not perfect though.
You will need to remove the link from "Oztivo Dreambox" to codeset 30114 in the IR database also.
Thanks.
-
Yes, thanks it's on the todo list, but a little unsure how to disassociate it using a slice. But I will get it sorted.
Probably won't be for a couple of weeks as I have lost ADSL due to a bad phone company churn and not likely to get it back for a couple of weeks, so now I'm stuck in the dark ages using dialup which is painfully slow and unreliable.
Peter.
-
Hi All,
Just wondering is there was any update on the DM500s codes ? I have a few boxes I am trying to set up, but the listed codes for the Dream do not seem to work.
Many thanks for your help.
Kronk.
-
You haven't added your location to your profile.
If your in Australia then Skolink's codes are now in the slice and if they don't work, then I can't really help you.
If your in New Zealand, then maybe they haven't updated the IR slice. Ask DJC to do so.
Peter.
-
1 Attachment(s)
D500S codes.
No they are not in the slice yet. Follow these instructions, but using the attached file.
http://www.oztivo.net/twiki/bin/view...FromIRDatabase
The command to issue rather than streamaster is loadcodes
also i recommend turning off leading zeros bu issuing the command
dbset xxxx/xx RecieverNumDigits 1 note the way receiver is spelt (i before e)
The attached codes are the original OzTiVo set, but don't work too well. I haven't had any success trying to capture a new set.
-
Thanks for your response Peter and Skolink.
I will give your instructions a try and see how I go.
Cheers,
Kronk.:)