donnam
11-07-2010, 09:05 PM
Hi
Have just bought a tivo after owning a toppy 5000 for 3yrs and being very happy. I didn't think it would be this hard since I knew my toppy back to front LOL.
When I bought it I knew that it wasn't smart enough to use the same tuner for a show that followed another on the same channel, although I assumed it would know to clip the show that is on the same channel, not the show on the other channel. Tonight I had the crazy situation at 9.35 of two tuners recording CSI and (CSI finishing and Cold Case starting on 9). It chopped off the end of the Good Wife. They are all season passes with Goodwife first, CSI second and Cold Case further down the list last (it was only put in about 15mins prior).
I have been mucking around with putting timers in and I am struggling to find a logical reason as to which show it will clip. It would be nice if it would give us a choice when it tell us there is a conflict. As soon as I think I have worked out the knack to setting timers with minimal conflict (or at least the end of your show going to the start of another) my theory goes out the window.
Is there a simple way of setting timers to minimize conflict without using manual recording? ie,
If when setting the timer it says there is a timer conflict and it will cut X show, does this get adjusted if you later change the season pass so that x show is the higher priority?
I also set my parents one up the other day and we just discoverd that SBS is missing from the channel lists. Do we do a rescan to see if it will show up then? Will that cause the loss of any timers etc?
Thank you in advance
Donna
Have just bought a tivo after owning a toppy 5000 for 3yrs and being very happy. I didn't think it would be this hard since I knew my toppy back to front LOL.
When I bought it I knew that it wasn't smart enough to use the same tuner for a show that followed another on the same channel, although I assumed it would know to clip the show that is on the same channel, not the show on the other channel. Tonight I had the crazy situation at 9.35 of two tuners recording CSI and (CSI finishing and Cold Case starting on 9). It chopped off the end of the Good Wife. They are all season passes with Goodwife first, CSI second and Cold Case further down the list last (it was only put in about 15mins prior).
I have been mucking around with putting timers in and I am struggling to find a logical reason as to which show it will clip. It would be nice if it would give us a choice when it tell us there is a conflict. As soon as I think I have worked out the knack to setting timers with minimal conflict (or at least the end of your show going to the start of another) my theory goes out the window.
Is there a simple way of setting timers to minimize conflict without using manual recording? ie,
If when setting the timer it says there is a timer conflict and it will cut X show, does this get adjusted if you later change the season pass so that x show is the higher priority?
I also set my parents one up the other day and we just discoverd that SBS is missing from the channel lists. Do we do a rescan to see if it will show up then? Will that cause the loss of any timers etc?
Thank you in advance
Donna