Saturn Digital ?

[zollymonsta]

Hi

Downloaded the latest image..

Selected 02116 ' Saturn Digital '
area code 002

When TiVo has made its call, it says no cable providers.

However, if I do it on 02115 it picks up Saturn Analogue.

Is this a known problem on the latest NZ image?

ZollyMonsta

[DJC]

Thats nothing to do with the image, thats an emulator issue.

Are toy running your setup against the default emulator in the image? (port 8000)

[zollymonsta]

orig file tclient.conf

# This uses emuProxy2 to avoid problems with transparent proxy. Thanks Tim!
127::127.0.0.1:8000:::

# NZ legacy
126::210.48.107.133:80:::

# NZ develop
128::210.48.107.133:8888:::

edited it (in case something weird with emuproxy2)

# This uses emuProxy2 to avoid problems with transparent proxy. Thanks Tim!
#127::127.0.0.1:8000:::

127::210.48.107.133:8000:::

# NZ legacy
#126::210.48.107.133:80:::

# NZ develop
#128::210.48.107.133:8888:::

But still no joy.

[zollymonsta]

If I give you my Tivo ID, would be able to see if it's been connecting to the correct port?

[DJC]

Haven't we been through this one before? with success...

Can you try against 8888 and lets see if that supports the 6 headend.

[zollymonsta]

Yes we had... :) Had the same problem.

I will do an edit of the tclient.conf file to point it at 8888 and see if it shows Saturn Digital then.

[zollymonsta]

Just did an edit, changed to port 8888 but still no show.

[zollymonsta]

Got it working again.

I might be wrong, but I suspect something in the tclient.conf file aint right.. maybe..

Here's what I did..

Reimaged drive with NZ version
Tried to connect and set up 02116 (Saturn Digital) area code 002
No Providers in my area it said.
So, I set up for Saturn Analogue.. let it do it's thing, then did a clear and delete.
While that was going on, I copied the tclient.conf file off my 2nd tivo over to my main one (which was doing the clear and delete... just after it finished).
Rebooted
Re-ran guided setup for 02116, area code 002.

This time it found Saturn Digital! Downloading guide data now.

[DJC]

A couple of headend and logo updates into this headend of late... have these shown up ok?

[zollymonsta]

Hi DJC,

I haven't noticed any changes.

I note the weather channel is still listed as 35.. It has now moved on Digital to channel 58. Channel 35 is now MTV.

[=CK=]

Hey yah, new here.

Just trying to setup the Tivo and I'm getting the same problem but with Sky Digital.

If i use 02113 then i get the no providers error.

If i choose 02112 the import takes much longer (10 mins instead of 1) but i only get the FTA channels.

I'm using 127::210.48.107.133:8000:::

area code 002

[=CK=]

Hmmm, I managed to get it going today... i think i chose Satellite instead of Cable... not sure now.

[Gazzagazzanz]

OK, I'm about to shift from Analogue to Digital. Any pointers? Any known issues? Zollymonster, did yours sort itself out? Weather channel moved correctly?

I am planning on reinstalling from the current NZ image at the same time as the new decoder goes in.

Thanks for any advice...

[zollymonsta]

Yeah I got there eventually.. I can't remember what I had to do to get it going though (was several months ago now). It wasn't as easy as I was led to believe though.. I may have been doing something wrong though :)

I don't do much with the Tivo now, in regards to tinkering. It just works (apart from having to fix the daylight savings thing today).

My 2nd Tivo isn't even plugged in at present. :) Perhaps I should sell it..