PDA

View Full Version : UK Tivo on port 8000



jaidev
31-03-2006, 05:12 PM
Does anyone have a uk tivo on port 8000 using the oztivo-pvr10uk-2.5.5 image?

Is your clock showing the correct time? The (tivoapp) guide clock? Also check what the command line (system) clock is showing...

How about port 80 uktivo users?

thomson
31-03-2006, 07:49 PM
What is the problem you are seeing? Have you got an NZ zoneinfo file (typically called /var/hack/zoneinfo/Pacific/Auckland), and do you have a /etc/postcodezones file?

I don't use an emulator but am happy to help track down the fault. I am not sure that the standard UK ntpdate command (created Feb 14 2002) handles timezones and this is what the emulator might be using?

I use an rdate implementation (http://www.forums.oztivo.net/showthread.php?p=2295&#post2295) to syncronise my TiVo's (UK-2.5.5 & US-3.0) once a week, and use a Daylight Savings script (http://www.forums.oztivo.net/showthread.php?p=2184#post2184) to accurately handle that adjustment.

jaidev
31-03-2006, 09:36 PM
hey dude..

yea well aiming to get this image ready for upload for us, however this has set me back a little, will just post what I asked on the mailing list

Using the oztivo-pvr10uk-2.5.5 on our NZ emulator port 8000
I seem to be having a time issue, got the postcode and zone files all setup
right.
Fixtivotime output

[TiVo [p0] ~]# fixtivotime
Our postcode is 02113. Found matching timezone Pacific/Auckland
Offset 43200 for timezone NZST, daylight saving is 0
Connecting to time server 207.126.98.204
t was 3352791091 from server
t is now 1143845491
Time is 2006-03-31 22:51:31
Time set to: Fri Mar 31 22:51:31 2006
Have a nice day.
Time set to: Fri Mar 31 22:51:31 2006
Have a nice day.
[TiVo [p0] ~]#


Which works fine, however the tivo gui and guide is showing the time an
hour ahead, i.e. Right now it's 11:53pm, It has also loaded guide onto the
tivo an hour ahead of localtime. i.e. All shows start an hour later than
scheduled in the guide..

The date output on the command line shows correct time..
Fri Mar 31 22:54:15 localtime 2006

I cant seem to find a timzone config on the uk tivo, does it use a timezone?
Currently /MFS/State doesn't have a LocationConfig like my Philips and
Sony TiVo's

Where is tivoapp getting the time an hour ahead?!

I canno't use timezoneadj30.tcl as it complains it cannot find
/MFS/State/LocationConfig
Can't remember if the Uktivos even have this..

Any ideas appreciated

petestrash
01-04-2006, 03:07 AM
The version of ntpdate the oztivo image uses during the daily call on the emulator releases is different to the original file. Not sure how this affects v2.5.5, but you can get the correct file @ ntpdate (http://minnie.tuhs.org/twiki/pub/Uploads/WebHome/ntpdate), swap it in then run a daily call and see if that helps.

Peter.

zollymonsta
01-04-2006, 04:24 AM
settime -rtc

then reboot?

thomson
01-04-2006, 06:34 AM
Currently /MFS/State doesn't have a LocationConfig like my Philips and Sony TiVo's

Where is tivoapp getting the time an hour ahead?!

I canno't use timezoneadj30.tcl as it complains it cannot find
/MFS/State/LocationConfig

I have attached a timezoneadjust.tcl file for the v2.5.1-2.5.5 versions. TimeZone and DaylightSavingsPolicy can be found under /MFS/Setup. They both need to be set to '0'. The attached file does this for you.

jaidev
01-04-2006, 10:03 AM
Thanks Pete will try that version.

Thompson thanks for reminding me, I entered those values in /MFS/Setup when I was using the uktivo on my emulator. I couldn't for the life of me figure out what I did to solve it... Ackk too much to remember for this tivo oldtimer :P

petestrash
01-04-2006, 04:51 PM
settime -rtc

The rtc is correct, it's tivoapp that is displaying the wrong time.

Peter.

jaidev
03-04-2006, 06:22 AM
Adding TimeZone and DaylightSavingsPolicy via timezoneadjust.tcl fixed it.
There will be a nzTiVo-Thompson image up soon..

thomson
03-04-2006, 12:28 PM
There will be a nzTiVo-Thompson image up soon..

You can stop the menu bar flickering on an old 50Hz TV by increading the size of all the lines to 2 pixels. There is a package attached to this post (http://www.tivocommunity.com/tivo-vb/showthread.php?p=2631866&&#post2631866) that will replace the images in the MFS database with ones that do not suffer from "flickering".

thomson
03-04-2006, 01:19 PM
Might also want to place autospace on the image. There is a version here (http://www.tivocommunity.com/tivo-vb/showthread.php?p=3688112&&#post3688112) that autodetects the UK software and adjusts the location of the usage bar appropriately.